PDA

View Full Version : 2004 Bentley Continental GT Kessy dead, No ignition.



accchris
7th June, 2022, 07:51 PM
Hi all, looking for some guidance/ information on what will and won't work.


Original Kessy dead, Eeprom dump corrupt, no valid data stored. 03D 909 135L from the best of my knowledge. (No label on module) someone has previously been into this as signs of soldering on eeprom.


I've sourced another 2 units , 1 with the same part number and 1 with different suffix. Both of these were off VW's as unable to source any Bentley ones.


I've tried unsuccessfully to adapt with VCDS despite having the Pins for Kessy and Pin from ECU's of Car. Kessy will accept PIN for security access but when adding Car PIN in adaption Channel 50 it shows Malfunction. They are No lock out timers active in measuring blocks.
Also tried with ODIS and Geko access today unsuccessfully.


Is the issue due to the fact i am trying to use a VW unit as opposed to one from Bentley (although Part numbers are the same)?


Can someone give some pointers of what is possible.


Oh also tried adding a key to one of the Kessy's.


Car is stuck with Windows down, steering lock on and in Park.