VW Golf 3 Motometer v: 5.3

[glove]

Hi,
the problem is this, I had to change my dashboard. I bout it from car parts seller, and now the km is different from original one. Is there a way to program it directly from 4pin plug on the bag of dashboard or from big one (main connection) and what is the program for this?

[smokinjoe]

you could swap the eeprom from old cluster to replacement one,should be a 93c56.

[glove]

The old one is dad and the memory too.

[avtonega]

It is possible with Tachouniversal...



But I always, desolder both displays and read eeprom directly with clip.

[pablo276]

there was about it look here
link (http://www.digital-kaos.co.uk/forums/f68/mileage-correction-vw-polo-95-a-54698/)
cheers m8

[glove]

there was about it look here
link (http://www.digital-kaos.co.uk/forums/f68/mileage-correction-vw-polo-95-a-54698/)
cheers m8

Ok I will see the link.

What about this program Licznik_9.02_AXIM, is it possible to use it and can I make a cable.

[MOBILTRONIC]

You must find it MM.exe(Motometer.exe)MS-DOS soft for this dash.Connections with lpt port to dash.For me, MM.exe soft work fine with this sw version of GIII.

[carclima]

swap the 93 eproms..unles you have some eprom programer ? If so read the chip 93 and post it here we can calculate new mileage..or if you have some old Pc/win98 search for simple cable from lpt to 4 pin on backside..there is no electronic simple cable,work perfect in dos..
easyiest way for you probably is swapeproms so try it

[R32]

Hey Glove. Try attached mm.exe on your dash. You have to do your own cable. All info attached, the only thing its in german. Also a simple 93cxx eeprom programer is PSEEP.exe. Google it if you need it. Also you have to use a old computer with this if you want it to work. I used a Chicony Laptop model: nb9800d, very old laptop, I think it has a 33MHz processor...LOL.

Thanks

[Akte22]

Hello, i cannot download this VDO MM zip.