bosch me 3.8x immo problem

[pessi]

hey
aeb 1.8t swap on mk2 golf
8D0907558E
026120485
24c02 readed and tryed 3 differend immo tool.

starts and runs about 2sec. no fault codes that should affect running eeprom error or ecu blocked current codes( carbon filter, boost control and fuel pump relay)

i wonder is my immtools not working or bad read/write i add orginal dump and current immo dump

someone can check these or some has orginal immo eprom dump and immo of with that?

i have now tryed 6 difrend dumps ( i habe same reguest on mhh forum)

3 of them eprom error and 3 of them no new fault codes and runs about 2 sec

i think some one has done something on that eprom there is marks on soldering it =(

[kiszka]

hey
aeb 1.8t swap on mk2 golf
8D0907558E
026120485
24c02 readed and tryed 3 differend immo tool.

starts and runs about 2sec. no fault codes that should affect running eeprom error or ecu blocked current codes( carbon filter, boost control and fuel pump relay)

i wonder is my immtools not working or bad read/write i add orginal dump and current immo dump

someone can check these or some has orginal immo eprom dump and immo of with that?

i have now tryed 6 difrend dumps ( i habe same reguest on mhh forum)

3 of them eprom error and 3 of them no new fault codes and runs about 2 sec

i think some one has done something on that eprom there is marks on soldering it =(
check this file
https://mega.nz/file/gqoUUZgb

[baltazar3]

hey
aeb 1.8t swap on mk2 golf
8D0907558E
026120485
24c02 readed and tryed 3 differend immo tool.

starts and runs about 2sec. no fault codes that should affect running eeprom error or ecu blocked current codes( carbon filter, boost control and fuel pump relay)

i wonder is my immtools not working or bad read/write i add orginal dump and current immo dump

someone can check these or some has orginal immo eprom dump and immo of with that?

i have now tryed 6 difrend dumps ( i habe same reguest on mhh forum)

3 of them eprom error and 3 of them no new fault codes and runs about 2 sec

i think some one has done something on that eprom there is marks on soldering it =(


Here is...try and report...pm

[pessi]

no faulcodes not working

[pessi]

not working

[pessi]

Here is...try and report...pm


not working no new coedes

[pessi]

check this file
https://mega.nz/file/gqoUUZgb


no new codes not working

[baltazar3]

not working no new coedes
If this no start...You have other problem...same pass

[pessi]

If this no start...You have other problem...same pass



This works great thanks man !!!