astra H isuzu ecu, denso

[ziko]

MB275800-4676
I readed donnor flash and 3x 93c86eep)
Also org 3x93c86 eeprom only, flash are damaged pins to read


Need clobe

[kiszka]

MB275800-4676
I readed donnor flash and 3x 93c86eep)
Also org 3x93c86 eeprom only, flash are damaged pins to read


Need clobe

>>> 8443 <<< org
>>> 6338 <<< donnor

[ziko]

will SWUPING 3 EPROMS ENOUGH FO CLONINHG

Tnx

[kiszka]

will SWUPING 3 EPROMS ENOUGH FO CLONINHG

Tnx

only full ecu reading for cloning

[ziko]

But, can i reset with your pins used ecu and then adspt it with opcom?

[kiszka]

But, can i reset with your pins used ecu and then adspt it with opcom?

By all means, you can do it after the pin
programming with a pin is the safest method, you can't mess anything up

[Mr BLACK]

his denso ecu rust ...so is a good idea to open ecu clean and add new sealant

[ziko]

I cant adapt by opcom because ori car is corsa, donor ecu is astra, it ask for CIM .....
Can someone send full corsa d flash, ori ecu pads damaged, cant read

[ziko]

Solved

Tnx