PDA

View Full Version : Primera P11 diesel Zexel ECU



carclima
24th February, 2010, 10:47 PM
Helo!
I have problems with this car..came to me after small crash,I manage to repair all electronic,central door locking,power wind..remotes for lock..but I cant start engine.MIL in dash flash fast when key is ignition ON..Here we dont have experience with this cars..my diagnostic is bosch KTS but uslees on this car..any idea what can I do? I found manuals here but they are all based on consult2 tool..I also opem engine ECU to see is there anything familiar inside..found OKI 951 small eprom familiar to me from some carradio decoding..

is there any info how to bypas immo/immooff on this ecu

regards

Ashraf6119
25th February, 2010, 10:03 PM
Hi

Primera do have problems with the key reader coil.

Remove the Coil clean the connection and make sure its nicely connected.

All The Best

Ash

carclima
26th February, 2010, 09:15 PM
Hi

Primera do have problems with the key reader coil.

Remove the Coil clean the connection and make sure its nicely connected.

All The Best

Ash

well my primera dont have ordinary coil like vag cars..coil is soldered in small case what should be antena amp. 4 wires conections..of course I checked resistance of coil its OK ,this type is litle diferent..I am realy not familiar whit this type immo protection..

simon77
26th February, 2010, 09:38 PM
post the ecu details i may have a couple of new ecu on the shelf i could read eprom ,may be you could try the virgin file.

matias
29th March, 2012, 08:35 PM
Hello,
how I can make virgin dump from ecu from 2.0TD 97
23710 2j615 and 407913-111 2. How I can disable immo?
Must I use emu? And which? Or is possible only disable
immo in dump in ecu?
I can?t check this in car, because car is 600km from me.
Many thx.