Moe1988
6th July, 2022, 05:43 PM
so got this dash with the 93c76 eeprom , was trying to read by rear solder point . couldnt get a gd read so i was trying my various tools and double checking my solder point . of course dash was powered up on bench an as i was resoldering pin 5 which is ground the pin 8 wire touched the iron so i had a short between vcc and ground .
at this point the screen lost all the numbers . dismantled the dash took the 93c76 out and of course it was dead .
now i got a new 93c76 eeprom an ive been trying various dumps from here but still no luck .
my dash is 78100 - tf0 -y231 . if you guys have a dump or a tip ...
any help would be apprecited guys . i cant find a dash in scrap yardsso im trying to work this one around .
at this point the screen lost all the numbers . dismantled the dash took the 93c76 out and of course it was dead .
now i got a new 93c76 eeprom an ive been trying various dumps from here but still no luck .
my dash is 78100 - tf0 -y231 . if you guys have a dump or a tip ...
any help would be apprecited guys . i cant find a dash in scrap yardsso im trying to work this one around .