2002 LAnd rover discovery 2 - need eka code

[drivesure]

good day - we have a land rover disco 2 with all keys lost. can anyone help us with an eka code from vin please ...
Vin: SALLTGM33XA207939 - or can advise where we can get from a site

thank you

[rapidlocksmiths]

https://www.radiocodes.co.uk/land-rover-immobiliser-codes

www.autosecuritycodes.com

[drivesure]

bought the eka code for this vehicle 5 7 C B ...we coverted it to - 5 7 12 11...even tried 5 7 13 12 all combos show incorrect code.

we trying to read the bcm but has 0G10V mcu on and we are trying to figure out how to read - any advice on how to read this bcm . thank you

[rapidlocksmiths]

it does convert to 5 , 7 , 12 , 11 .

these old vehicles can have door switch issues , also if its had an ecu change which is common too then they likely changed the eka code .

silly question but i assume you waited the 5 mins after entering eka code until immo light stops its 2 second flashing and switches off , and got ignition on withing 30 seconds of this ? so many forget this bit is why i ask.

[drivesure]

hi rapid, dont get to the 5mins wait period, the last turn before this is the hooter must signal twice if correct code or code was entered correctly, ater 3 attemps waiting period of 10mins. we get one hooter every time. that is why we trying to read bcm to confirm the eka code ... wanted to know if anyone read g10v successfully with a programmer. thank you