audi a6 c5 need immo from ECU

[jackie86]

hi guys.can someone calculate pin for this car?

audi a6 2001 2.5 tdi
ecu: 0 281 010 496

eeprom 24c04

**original cluster is burned so need to code other one/
need login code from ecu...

[evgeny87]

try 07280 .............

[jackie86]

try 07280 .............

Not work..


Sent from my iPhone using Tapatalk

[evgeny87]

There is something wrong in your dump but this must be right pin. check measuring blocks/group 024.
can you read old cluster eeprom wth programmer direct on 93c86 chip (if VDO) or motorola HC12 (if jaeger)?

[jackie86]

immo off would also be ok...?

[jackie86]

There is something wrong in your dump but this must be right pin. check measuring blocks/group 024.
can you read old cluster eeprom wth programmer direct on 93c86 chip (if VDO) or motorola HC12 (if jaeger)?

car came with dead cluster(VDO with 93c86), eeprom is empty...
*i am tryin to put new cluster in with procedure like in golf4..instrument cluster-login-adaptation-chanel 50-PIN?
that is where i stucked..i think that this procedure should work for this car...

[evgeny87]

i dont like immo off, if you do this you must open new cluster and "disable" immo light. car will start but immо symbol will blink permanently

are you sure its empty?

[jackie86]

i dont like immo off, if you do this you must open new cluster and "disable" immo light. car will start but immо symbol will blink permanently

are you sure its empty?

Yes for shure. Some guys is mess with lcd and burn cluster.. eeprom is readed by programmer, emty…


Sent from my iPhone using Tapatalk

[jackie86]

There is something wrong in your dump but this must be right pin. check measuring blocks/group 024.
can you read old cluster eeprom wth programmer direct on 93c86 chip (if VDO) or motorola HC12 (if jaeger)?

Cant read 024 on ecu, on instrument got this:
https://uploads.tapatalk-cdn.com/20220716/923d8aff0c0ce48feab74452b27a647a.jpg


Sent from my iPhone using Tapatalk

[evgeny87]

pin stil not acepted? how you read ecu eeprom? its lncomplette but for little modification this must be your data. can you read ecu through obd?

You must login to cluster with his pin, and put 07280 in 50-th channel

[jackie86]

ecu wont accept this login..in cluster chanel 50 with this pin say malfunction or disabled(first window), second window write ''8.0'' ...24c04 is readed by programmer.
cant read pin by obd(vvdi2, vag dash com, blue standalone super vag k+can)
maybe haave problem with login lock time.. i will connect chrger later and put ignition on to wait and try

[evgeny87]

if you post new dash eep i can transfer this data to it, after that no need adaptation to 50th channel, only keys must be matched. if this not work i cant help anymore..

[jackie86]

if you post new dash eep i can transfer this data to it, after that no need adaptation to 50th channel, only keys must be matched. if this not work i cant help anymore..

That would be great. I will post later for about half hour-hour, i just come home to take a little rest. Thank you friend.


Sent from my iPhone using Tapatalk

[jackie86]

if you post new dash eep i can transfer this data to it, after that no need adaptation to 50th channel, only keys must be matched. if this not work i cant help anymore..
here is cluster dump

[jackie86]

Update:
Login is ok, just need to wait 15 min
Job done. Thank you friend


Sent from my iPhone using Tapatalk

[evgeny87]

...............:top: