vag s6 med9.1 0261S02367 it only starts once then i have to remove battery to start

[reproteq]

vag s6 med9.1 0261S02367
it only starts once then i have to remove battery to start again

something strange only starts once, then if I remove the battery I can start again.
Has anyone had something like this happen to these audi s6?

[morgano]

Hello

Do you have original ecu flash and eeprom dumps?¿

[reproteq]

Hello

Do you have original ecu flash and eeprom dumps?¿
yes sure i have alls files 2 ecus

[morgano]

yes sure i have alls files 2 ecus

Then why not flash full bdm from ori ecu to donor? Car should start

[reproteq]

Then why not flash full bdm from ori ecu to donor? Car should start
the owner sent the ecus to a friend who corrupted the files and then they bought 2 more ecus, this car has 2 ecus, so now we have 4 ecus and with all of them it starts only once, then you have to remove the battery for it to come back to start.

[brend]

the owner sent the ecus to a friend who corrupted the files and then they bought 2 more ecus, this car has 2 ecus, so now we have 4 ecus and with all of them it starts only once, then you have to remove the battery for it to come back to start.


And what prevents you from linking it all via login ?
It will take 2 minutes with vcds .

[waldi1979]

A long time ago I had that at Volvo ME7.0.
It was flash checksum problem.

[raceshadow]

Sounds like CRC problem.

[reproteq]

flash is original and i use ktag genuine for write and i have 4 ecus and with alls same issue
meaby now is posible start 1 time i go speak with the owner and he brings the car here

[raceshadow]

flash is original and i use ktag genuine for write and i have 4 ecus and with alls same issue
meaby now is posible start 1 time i go speak with the owner and he brings the car here

4 ecus have same eeprom?

[chipchip]

ckecksum not correct please verify the checksum file and autocorrection machine

[kiszka]

flash is original and i use ktag genuine for write and i have 4 ecus and with alls same issue
meaby now is posible start 1 time i go speak with the owner and he brings the car here

what errors do you have in ecu

[danielif]

Immo Off
Disabling Immobilizer...
Verifying checksums...
Block IMMO1 : Wrong but corrected (0xF29B)
Block IMMO2 : Wrong but corrected (0xF29B)
Corrected 2 checksums. You may save now.
IMMO is disabled.


Pass in skype :)

[reproteq]

i remove immo whitn idecoxxxer and work fine in this med9x but i think this car have other issues

here dtcs show in med:
DTC 1923 0458 1435 1421 1602 1923 U0155 1653 1650

but dtc in abs and dash and other devices.

car start but when I stop it, until I remove the battery and disconnect the control units and reconnect them, it does not start. if i do this it always starts

[immokill]

I had same problem. CHEKSUMM IS PROBLEM . Calculate cheksum with Winols and wrute flash .

Send from my TELETEXT

[reproteq]

I had same problem. CHEKSUMM IS PROBLEM . Calculate cheksum with Winols and wrute flash .

Send from my TELETEXT

How can it be a cks error in the flash when they are 2 ecus extracted from another car just like it was scrapped that only the immo in the eprom has been removed.
do you mean that the second hand ecus have the wrong cks when no one has programmed them before?
I think it's something a little strange

In addition, I also clone the data of the scrapped ones in the original ones because someone had already manipulated them and in this way have the original software, ktag is supposed to correct cks in writing, so when I wrote the soft it should have corrected the cks in case of being wrong .
only data has been inserted in the eproms to make immooff.

Anyway, I think I won't lose anything by trying what you say, maybe you're right.



but thanks for your help

[reproteq]

I had same problem. CHEKSUMM IS PROBLEM . Calculate cheksum with Winols and wrute flash .

Send from my TELETEXT

i tri this i correct cks with ols and same issue , only start 1 time after remove battery and other time can start
see video if you want

[immokill]

I had problem cheksum maybe you have problem Immo Off
Best way is to update ecu with Odis enginering . Then all files will be o k.
Then male immo off and try to start

I dont know why dont more members help our friend here !

[kiszka]

I had problem cheksum maybe you have problem Immo Off
Best way is to update ecu with Odis enginering . Then all files will be o k.
Then male immo off and try to start

I dont know why dont more members help our friend here !

the answer is very simple, ecu is crypto