Immo off instrument cluster

[dooms]

hey
bought another used instrument cluster for octavia 2007 but can't use it because it is immobilizer active
is there anyone willing to help me

[rafal]

off in ecu m8 ........................ lol

[dooms]

hey rafal
Are you sure i asked on another site where my immobilizer is and everyone says in instrument cluster

[raceshadow]

hey
bought another used instrument cluster for octavia 2007 but can't use it because it is immobilizer active
is there anyone willing to help me

Yes, is it in the intrument cluster, but here you can not make immo off. Only in engine ECU. Or copy immo data from old to new cluster. (FVDI a and next)

[evgeny87]

yes, your immobliser is n the cluster, you should adapt your new dash, or make immo off in ecu. instrment send message to ecu to start engine or not if you have problem with immo.

[rafal]

hey rafal
Are you sure i asked on another site where my immobilizer is and everyone says in instrument cluster

if you are asking where immo is stored and how system of immo is builded in car - change job or don't touch this car

[dooms]

thanks for your answer rafal but how can i learn if i can't ask
you never started from zero
grts

[Mr BLACK]

what tools do you have mate ...? yes in most vag group cars immo is in dash ...if you do immo off in ecu you have SAFE on dash(used dash) ..so you must buy some tools to do the job

[dooms]

My tools that I have already bought but nothing works
ObdlinkSX
Vag key login
Vag-k-line commander 1.4
vag-can-pro5.1
Autophix 3210
Achate t41
carista
Vas6154 With odis 7.2 and odis 12
Rosstech Hex-2 with VCDS original
driver box edc15/me7
ezp2019+
ch341A

[immokill]

Read pin code from new dash with tool . Read pin code from ecu or old dash.
Use VCDS adapt used dash to car. All this you have on ross tech web . Programm key and start car .
Follow instructions on ross tech mate you have tools to do that.
Regards


Send from my TELETEXT

[dooms]

Hey immokill

that's just the problem of the used instrum cluster I can't get the pin from eeprom 24c32

[Volker]

Maybe the cluster is damaged?

Can you post dump?

[Panathaole]

check your instrument, if is in two pieces, the back pcb is the immo, just exchange it.....

whats the problem of the ori cluster?

[dooms]

here's the file I was able to read from the instrument cluster used
i can read the chip of the two insttrument but have no program that can read them have 2 file 1 from old and 1 from new used cluster
i would have to change my vin in the new cluster and change odometer too old has 248310 miles and new 187580

[dooms]

Hi Panathaole

the instrument is in two parts and eeprom on the back part is a 24c32 chip

the reason i want to put other instrument is that lcd screen becomes blurry

[ilzul]

If the cluster lcd is minidot you probably won't get immo active message, but the light will blink.
Read ecu eeprom and we can help you with an immo off solution.
You can not do immo off on cluster.

[Panathaole]

As i already told you, just exchange the back pcd, the immo part....

[ilzul]

As i already told you, just exchange the back pcd, the immo part....
As like that, or much simple take the "new cluster" upper pcb part (one with display and needles) and exchange it in your cluster.

[Panathaole]

As like that, or much simple take the "new cluster" upper pcb part (one with display and needles) and exchange it in your cluster.


did i say something different????

[dooms]

Hi


now i have big problems have read ecu have 95320 now i can't start my car vcds can no longer reach my engine help pleas

[dooms]

now i have big problems have read ecu have 95320
now i can't start my car vcds can no longer reach my engine

[akidor]

Thats bad and something went wrong. Did you desolder eeprom ? Maybe bad soldering after reading?

You should have done what panathaole wrote, but now it is what it is.

[rafal]

as i said....................don't touch car if no knowlage
i understand that you want save some money..............but.............as you see - bigger problem as before now