Pin Out ECU Zexel Nissan Patrol Y61 3.0D

[albertojose]

Hello partners:


I have searched the forum and technical documentation software without success. I need the pin out to connect with this ECU Zexel 407917 - 057 Nissan Patrol Y61 by bench. I have tried the Autodata schematics but my AUTEL does not identify the ECU.

I need to connect by OBD to read real values


Thanks for the help.

[albertojose]

Help please

[rawnq]

here is ZD30 (DDTI) Y61 Nissan patrol 3.0 ecu pinout , hope it help

[albertojose]

I can't communicate with the ECU. I think this ECU does not use CAN or K Line protocol.


I attach the schematic from the ECU pins to the OBD2 port


I have tried with Autel and Delphi


Can anybody help me?

[rawnq]

there is a comm line between ecu and electronic fuel injection pump ( CAN ) pin 33 can L / pin 40 can H
try these connection see if anything come up , see attached image

[albertojose]

there is a comm line between ecu and electronic fuel injection pump ( CAN ) pin 33 can L / pin 40 can H
try these connection see if anything come up , see attached image

I have tried to connect to the CAN H and CAN L pins but it does not work.


I don't know what else I can do to communicate with this ecu?

[gvozw]

https://www.drive2.ru/l/590369025712756602/