Mercedes Sprinter IMMO BOX Pinout - OLD

[tepSIJA]

Hello ppls

Did someone have pinout for reading this immobox of Mercedes Sprinter 1999 year

I have some tools but cant fin this type of immo box , only newer immox have pinout . maybe i am missing something.

If no pinout only solution is desolder and read with programer than !?

Regards and thx in advance

[gwiazdamb]

1 antena
2 gnd
3 +12v
4 check lam
5 can H
6 can L
7 ACC
8 diagnosis
9 signal to the door lock
11 cewka key
12 cewka gnd

[rafal]

1 antena
2 gnd
3 +12v
4 check lam
5 can H
6 can L
7 ACC
8 diagnosis
9 signal to the door lock
11 cewka key
12 cewka gnd

user wanted pinout for read mcu m8.......................use google translator if need

[meser75]

If no pinout only solution is desolder and read with programer than !?

*D62J MC68HC05X16

This is information from the Orange5 programmer.

This MCU can only be read by a programmer that can bypass protection in the MC68HC05X series.
I successfully read this MCU with the "OMEGA" programmer.

[gwiazdamb]

My mistake I did not read, this processor reads the ETL well in the socket

[tepSIJA]

thank you anyway for discussion . i did not find and pinout to read this on board so i desolder and read with Xprog

XProg read this with adapter without problem
P.s. I need to done All Key Lost on this car