read CAS3 E90

[shoufi]

hi masters here. i want to read bmw cas3. what tools do you use? i only have iprog....

[sharpshooter86]

hi masters here. i want to read bmw cas3. what tools do you use? i only have iprog....

purchase VVDI prog

[wuza]

I use Vvdi2 and Vvdi programmer...

If your budget is small, then you can try r270 programmer.
Keep in mind that is an clone tool (not very safe)...

[rico126pl]

purchase AK90

are you kidding ?
ak90 is good for ews system's
for cas only vvdi prog, xporg, r270, autel xp400

[shoufi]

I already bought an ak90. waiting for delivery. thank you master

[Oktawian]

And what you would do with this ak90 ?

:D

[mawoussiboris]

I already bought an ak90. waiting for delivery. thank you masterHi, it useless for cas3. Unless you want to brick it. Better xprog or vvdi

[p1et]

I already bought an ak90. waiting for delivery. thank you master

True master if he recommended you ak90 for this job :D.

AK300 will do but not AK90... But AK300 was in use 10 years ago...

[gwiazdamb]

hi masters here. i want to read bmw cas3. what tools do you use? i only have iprog....


Cas 3 eeprm flash X prog read i always use OK

Cas 3 eeprom flash X prog read I always use it and it's OK

[shoufi]

I actually already bought the AK90. this is info sharpshooter86. i am confused reading my CAS module. this is the attached image. please masters help me.

[mawoussiboris]

My friend, if you want People to help you, learn to say thank, you havent left any thank for all the help People gave you

[wuza]

The tool AK90 is for EWS2/ 3/ 4.
Tool for CAS 1/ 2/ 3/ 4: Vvdi prog, xprog and so on...

[fred77]

Be prepared to brick you CAS when you do finally buy right kit.

Bill of £600+ at dealer