ALMERA 1.4 16V 1997 ECU HITASHI MEC-N207

[skens]

hi
Nissan ALMERA 1.4 16V 1997 ECU HITASHI MEC-N207
please immo off
eeprom B95AB
tnx.regards

[skens]

hi
tried with 2 rows 01 93c46 x8 and x16, but the car does not start, does anyone have a solution?
regards

[brend]

For safe time , easy reprogramm key and done , all this take 1-2 min .

[Panathaole]

Why you need off?

Usually the antenna had problems, check it and replace it if is faulty and then synchronized....

As brend said 1-2 minutes and done...

[skens]

hi
I can't connect to the diagnosis on the car

tnx regards

[Panathaole]

hi
I can't connect to the diagnosis on the car

tnx regards


in none of the modules???

[rafal]

hi
I can't connect to the diagnosis on the car

tnx regards

if................. even good off will not help you - when wiring/relay/fuse bricked

[skens]

hi
the customer lost her key!
I can't connect to the diagnosis on the car to any module, I have power on the connector for diagnosis
please manual!!! please dump immo off
the power supply to the ecu is complete, when I add the contact I can hear the gas pump working! the starter works but the engine does not start
regards

[rafal]

........................

[skens]

hi
not ok,
please do 93c46x16 for me because that is the chip,but i try 01 to all 2 rows! not ok

regards

[rafal]

hi
not ok,
please do 93c46x16 for me because that is the chip,but i try 01 to all 2 rows! not ok

regards

no..................... c56 is ok in that ecu
have you disconnected immobox after write my file ?

[skens]

hi
c56 is not ok in that ecu, it's 93c46, I checked the verification code, I programmed your c56 ,I disconnected the immobox!!!

regards