TID+CD30 to BID+CD30MP3

[korner]

I was trying to change in Opel Astra H TID+CD30 to BID+CD30MP3 and I encountered problems. Maybe someone could confirm that I'm doing that in proper way?
TID - my own, I know car pas 2070
BID - new, unlogged, no car pass
CD30 - my own, I know car pas 2070
CD30MP3 - new, logged, with code 0918


Steps


1. Original TID+CD30 was logged out via op-com with my car pass. Display safe was shown and radio was beeping.
2. I've replaced TID with BID to check if they will work together and logged BID+CD30 with my car pass and it was working.
3. I've logged out BID+CD30 and replaced CD30 with CD30MP3. I've tried to login them together with carpass of CD30MP3 (0918), but opcom said that programming was failed.
4. I've made a dump of CD30MP3 and used this site (https://mbrdar.gitlab.io/radio-unlock/radio/CD30) to unregister and I've wrote unregistered dump to CD30MP3.
5. Tried once again to login BID+CD30MP3, this time with my car pass 2070 but without success as in pt.3
6. Tried also login BID+CD30 with my car pass, replace CD30 to CD30MP3 (without loggin out) and once again login BID+CD30MP3 but also without success.


To summarize - I'm able to login/logout new BID + my own CD30 but not able to login that new BID + new CD30MP3.


Can anyone confirm that I did the whole procedure correctly?

[shooting]

I was trying to change in Opel Astra H TID+CD30 to BID+CD30MP3 and I encountered problems. Maybe someone could confirm that I'm doing that in proper way?
TID - my own, I know car pas 2070
BID - new, unlogged, no car pass
CD30 - my own, I know car pas 2070
CD30MP3 - new, logged, with code 0918


Steps


1. Original TID+CD30 was logged out via op-com with my car pass. Display safe was shown and radio was beeping.
2. I've replaced TID with BID to check if they will work together and logged BID+CD30 with my car pass and it was working.
3. I've logged out BID+CD30 and replaced CD30 with CD30MP3. I've tried to login them together with carpass of CD30MP3 (0918), but opcom said that programming was failed.
4. I've made a dump of CD30MP3 and used this site (https://mbrdar.gitlab.io/radio-unlock/radio/CD30) to unregister and I've wrote unregistered dump to CD30MP3.
5. Tried once again to login BID+CD30MP3, this time with my car pass 2070 but without success as in pt.3
6. Tried also login BID+CD30 with my car pass, replace CD30 to CD30MP3 (without loggin out) and once again login BID+CD30MP3 but also without success.


To summarize - I'm able to login/logout new BID + my own CD30 but not able to login that new BID + new CD30MP3.


Can anyone confirm that I did the whole procedure correctly?


Post dump from BOTH displays and BOTH radio's


wbr

[korner]

Here you go.
I forgot to mention - BID and CD30MP3 aren't from one car. They're from 2 different.

[shooting]

Here you go.
I forgot to mention - BID and CD30MP3 aren't from one car. They're from 2 different.

Use this dump in the new mp3 radio and enjoy...
(For reference, your display dumps need to be read in 8bit not 16bit)



wbr

[joki89]

I need help also, with cd30 mp3 and gid display
I have original tid display with car, original cd30 mp3 radio with same code with car
now have installed gid display and i'm seeing radio safe od 10 seconds and beep
steps from how i get there are:
1. deactivated theft protection from radio and tid with original code from radio
2.deattached tid from radio and attached new gid
3. i have read dump from gid and i think that code is 1198
4. somehow i put the radio in delivery state and it beeps on 10 seconds with radio safe on display
5. with tech2 i changed vin code and code index to 027 for meriva a with engine z16xep petrol with 15inch tyres

[shooting]

I need help also, with cd30 mp3 and gid display
I have original tid display with car, original cd30 mp3 radio with same code with car
now have installed gid display and i'm seeing radio safe od 10 seconds and beep
steps from how i get there are:
1. deactivated theft protection from radio and tid with original code from radio
2.deattached tid from radio and attached new gid
3. i have read dump from gid and i think that code is 1198
4. somehow i put the radio in delivery state and it beeps on 10 seconds with radio safe on display
5. with tech2 i changed vin code and code index to 027 for meriva a with engine z16xep petrol with 15inch tyres

Post original display also


wbr

[joki89]

Post original display also


wbrHere is my original dump from car display, my cd30 mp3 is in delivery state and beeps with radio safe short message
923124

Sent from my EML-L29 using Tapatalk

[shooting]

Here is my original dump from car display, my cd30 mp3 is in delivery state and beeps with radio safe short message
923124

Sent from my EML-L29 using Tapatalk

Here is your display repaired, pair radio using 8036


wbr

[joki89]

Here is your display repaired, pair radio using 8036


wbrI'm little bit confused, how i can use my new gid display with my original cd30mp3?

Sent from my EML-L29 using Tapatalk

[shooting]

I'm little bit confused, how i can use my new gid display with my original cd30mp3?

Sent from my EML-L29 using Tapatalk


Ah ok, your post wasn't clear, you have new display, use this in your new display then pair using 8036


wbr

[joki89]

Ah ok, your post wasn't clear, you have new display, use this in your new display then pair using 8036


wbrJob done, thanks a lot[emoji847] now i must change code index only with tech2 (my china clone doesn't do the job)

Sent from my EML-L29 using Tapatalk

[shooting]

Job done, thanks a lot[emoji847] now i must change code index only with tech2 (my china clone doesn't do the job)

Sent from my EML-L29 using Tapatalk

If you use search you will find I posted an update for OPCOM, this will allow you to make correct changes


wbr

[joki89]

If you use search you will find I posted an update for OPCOM, this will allow you to make correct changes


wbrWhy on hidden menu on coolant teperature i'm seeing -39degree celsius and not same with opcom 105 or 104degree
Thanks in advance

Sent from my EML-L29 using Tapatalk

[shooting]

Why on hidden menu on coolant teperature i'm seeing -39degree celsius and not same with opcom 105 or 104degree
Thanks in advance

Sent from my EML-L29 using Tapatalk


Chinese clones don't always provide correct information because they butcher software with no regard for useage



wbr

[joki89]

But the issue is with gid display not op-com
On gid shows -39degree

Sent from my EML-L29 using Tapatalk

[shooting]

But the issue is with gid display not op-com
On gid shows -39degree

Sent from my EML-L29 using Tapatalk


So problem? Temp sensor might have fault, run diagnostics


wbr

[joki89]

On my old tid display it was same with opcom on ecu readings
After swap with gid it shows constantly minus 39degree [emoji3525]

Sent from my EML-L29 using Tapatalk

[shooting]

On my old tid display it was same with opcom on ecu readings
After swap with gid it shows constantly minus 39degree [emoji3525]

Sent from my EML-L29 using Tapatalk


Then maybe connector fault on Temp wire



wbr