bmw 320i N46 E90 to sync. ecu used.

[shoufi]

masters here. I have a bmw n46 E 90 320i. broken ecu. and I have a replacement. same part number. bosch dme 7552 176 01. already I read read mcu and flash. and cas 2 2k79x flash and eprom. original vin = WDB1704492F208234. vin ecu replacement = WBAVA710X0VA38199. help me to sync. what is written. I would be grateful if it helped.

[ilian_cho]

Make sync with some diagnostic tool.

[shoufi]

Make sync with some diagnostic tool.
I will write on the eprom 2k79x cas. and I will report the results.

[shoufi]

I report. engine can't start. no spark plug fire. someone can help me.

[shoufi]

Selaraskan dengan beberapa alat diagnostik.
I report. engine can't start. no spark plug fire. someone can help me. rotating crank. engine does not running.

[kiszka]

I report. engine can't start. no spark plug fire. someone can help me. rotating crank. engine does not running.


Make sync with some diagnostic tool.
read that green text he wrote to you

[shoufi]

read that green text he wrote to you

I have already done. my diagnostic tool x431. successful synchronization. the car can start. crank rotates... but engine doesn't run. . full pump running. spark plug is dead.i found one problem 29DD...29dd bmw poor road surface detection..

[shoufi]

Make sync with some diagnostic tool.
Thank You. friend. the engine is running successfully. and I'm fixing another problem..