fiat doblo 8f3 ecu p2563 problem

[kospoz]

hi mates i am dealing with a difficult situation here with a fiat doblo 1.3 2015 8f3 ecu.car has came from another store with p2563.previous store has changed turbo(rebuild) map sensor maf sensor and solenoid for the turbo which generate the vacuum pressure.when i accelerate car goes into limp mode with p2563 dtc.also ecu has been modified for dpf and egr off.can someone check the files maybe wrong solution?

[Carli]

Did you try to return back to ori, and see will still have same dtc?

[ceecdk]

p2563 is turbo variable geometry position error, can be:
- variable geometry dirty
- turbo solenoid vacuum leak
- position sensor stuck or bad
- sensor connector or cable
- bad remap

Check via OBD "copy position sensor" when moving with hand the geometry. After check on road desired vnt and copy position, it should be similar.

[kgb20]

want dtc off - please here is the file

PASS PM

[kospoz]

I have limp mode so dtc off is useless.can be the catalyst?because previous mechanic told me that he tried 2 turbos without amy progress

[mexanico1971]

I have limp mode so dtc off is useless.can be the catalyst?because previous mechanic told me that he tried 2 turbos without amy progress


And the problem was ?