VW BOSCH ME7.5 0261207082

[Amirista]

Trying to get my 2001 beetle 2.0 auto trans running.

VCDS lite says that engine start blocked by immo.

Attached is the ecu.bin file. i tried to pull the pin code from ecu to try to pair my cluster and keys but no dice. Cant afford to send off ecu.

im using kkl cable on com1

[kiszka]

Trying to get my 2001 beetle 2.0 auto trans running.

VCDS lite says that engine start blocked by immo.

Attached is the ecu.bin file. i tried to pull the pin code from ecu to try to pair my cluster and keys but no dice. Cant afford to send off ecu.

im using kkl cable on com1
off, or read eeprom dash
https://mega.nz/file/AqhnjCjS

[Amirista]

Am I able to write this bin file to the ECU with it still installed in the vehicle using just a KKL cable? If so, I'm using Windows 10 and can us command prompt, or run sandbox Linux. Just need a good program.

Also, I'll search for a cluster eeprom reader tonight. My cluster came out of an 05 VW beetle. I would like to tune the cluster with VCDS.

[Amirista]

I found a eeprom reader(using Vag Commander). My issue is that it said wrong baudrate and then says no ECU found. Is there a way I can change the baudrate? Or is there another program compatible with the Bosch cluster? Using KKL USB cable.

[kiszka]

I found a eeprom reader(using Vag Commander). My issue is that it said wrong baudrate and then says no ECU found. Is there a way I can change the baudrate? Or is there another program compatible with the Bosch cluster? Using KKL USB cable.
I think you have a Magneti Marelli counter and KKL will not be able to overcome it

[Amirista]

You're right. I even have a 1999 cluster and its the same type of cluster. So I should just flash the ECU with the bin?

[Amirista]

Is there a program I can use to flash the ECU without putting it in bootmode?

[Amirista]

Can anyone help? I must get this car running so I can start working again.

[Amirista]

Bump can anyone help?