Read BCM2 Audi Q5 2009 Pinout and help please !!!

[Col19]

Hi friends


Ok i made a mistake with Fvdi to repair a Q5 2011 ignition and start problem due to blocked ELV.


I tried to simulate a change of BCM2, now I no longer have contact or centralization and no more communication with BCM2.


The references are:


VAG N: 8K0907064CQ SW0431


Chip on bcm2: 70F3381 without eeprom


I am willing to pay for the repair if possible but first I would like to read the data.


I have an Iprog+ and see 70f3381 in the list but I can't find the pinout.


Could a friend share the Iprog pinouts with me please?


Thanks and respect in advance.

[rafal]

http://blog.vvdishop.com/xhorse-vvdi-prog-pinout-for-bcm2-audi-a5-70f3380/

[Col19]

Thank you dear friend *****Rafal***** the unforgettable, always there to help.

I think I have to use the 44 pin adapter but I don't understand the correspondence of the Pin "FLMD0".

I don't have such a pin on the 44 pin adapter of the iprog, should I connect with "AD0" ?

Thanks for your help.

[rafal]

iprog+ ori or clone?
if clone = big risk read bcm2

[Col19]

Yes ori no problem

[Col19]

What an adventure this BCM2!!!

Will share the result.

[Col19]

Hi friends


OK i read with iprog+ ori, i don't know if it's ok, here is the Dflash and Pflash

Thanks

[Col19]

The file was saved in Hex format, here is the bin format + decoding info. Thank you for the verification and modification for repair.

[Col19]

Hi friends, ok problem solved, if a friend has the same problem one day I could help without problem, respect to Rafal, thank you.

[urcarpc]

I read with vvdi prog, d-flash is full of FF's p-flash has data in it. Does this mean d-flash is blank or locked? Thanks.

Car is a stolen recovered, bought from auction so im not sure if its had any attempts to programme new key in before they sold it off

[kuebk]

Empty DFLASH means that there is external eeprom.