Kia Stinger 95910-J5300 Crash Clear

[dam234]

HI ALL
I need clear crash data from Kia Stinger 95910-J5300
643775900
MCU Infineon XC2361A-72f
Thank You

[jokir]

Test and report

[dam234]

Test and report
No work

code B1620 ->Internal Fault - Replace SRSCM

[dam234]

someone will help?

[kwat]

here you go...

[jokir]

When checking keep in mind that the error B1620 is registered in the block if it is powered in the disassembled state or if it was turnrd over.
If the srs ecu is connected to the programmer, while the reset is connected, the block does not startand does not registered the error B 1620. Do not test on the bench ECUs with maximalcomplectation it will be B 1620. Test on the car only.

[dam234]

No work

code B1620 ->Internal Fault - Replace SRSCM

[dam234]

When checking keep in mind that the error B1620 is registered in the block if it is powered in the disassembled state or if it was turnrd over.
If the srs ecu is connected to the programmer, while the reset is connected, the block does not startand does not registered the error B 1620. Do not test on the bench ECUs with maximalcomplectation it will be B 1620. Test on the car only.

Bench and car tested.


I can not remove errors in the driver


The code B1620 -> Internal Fault - Replace SRSCM is displayed

[slavik]

Hi try and report.


Pass in PM


If I helped, please use reputation+thanks button.

[fuzz1]

When checking keep in mind that the error B1620 is registered in the block if it is powered in the disassembled state or if it was turnrd over.
If the srs ecu is connected to the programmer, while the reset is connected, the block does not startand does not registered the error B 1620. Do not test on the bench ECUs with maximalcomplectation it will be B 1620. Test on the car only.

Hi
Can the problem be solved or according to you or too late now?

[dam234]

Hi
Can the problem be solved or according to you too late now?

Hello Friend. The topic has not been resolved yet

[dam234]

someone will help?