912 adapter OBP for ETL

[stevan]

Hello friends ,i want to buy 112 and 80 pin adapter for 912 mcu;s and have found but have dileme.
Buyer ask me about pitch for 112 and 80 pin,is it 0.5 or 0.8 mm?
I;m not shure ,anyone know?
I know that 22mm is 112mcu wide.

[MOBILTRONIC]

Got the CD from the ETL for the HC912 chip set of measures and legs, just for each MCU.I believe you will find that what you are interested.

[stevan]

I vas looking in some datasheet but not found pitch,i think 0.8 is ok

Pitch is space between two pin

[VagSoft]

For HC912 QFP80 and HC912 QFP112 pitch is 0.65mm

[stevan]

Thanx Vag,i found onlt 0.5 and 0.8 adapters so i will take 0.5 and 99% shuld be ok.

[VagSoft]

I think not OK :)

0.65 - 0.5 = 0.15mm
20 x 0.15 = 3mm

[Room]

I am use:
Yamaichi for 80 pin S07-IC51-0804-956-2, QFP-TQFP-test-sockets, test-socket.com (http://test-socket.com/Part/,IC51-0804-956-2.htm)
Wells for 112 pin S07-7020-112-6-08, QFP-TQFP-test-sockets, test-socket.com (http://test-socket.com/Part/,7020-112-6-08.htm)

[Mracni]

Somebody have PCB file for Yamaichi socked ?for ETL 908 and 705 QFP 64? for Eagle or other PCB software disain?

[stevan]

This is my way :wink:

Thanx Room for adapter info,it help me.

[stevan]

Be aware,for 908 you need IC51-064-824-1 but for 705 need 824-3,so one adapter for both MCU will not be good.
Maybe adapter with open top will do job,but clamshell type not 100%