AUDI A4 2002 RB4 - adaption question

[CARPARTS]

original dash 8H0920900C is broke
i have used dash with 100% same numbers

24C08 km-data is "crypted"
dash is RB4 from 2002

can it be learned with VCDS, or is ODIS (GEKO) needed ?

Thx for advices

[evgeny87]

Vcds and both pins. Not need odis.

[armi]

All what you want to do with audi RB4 you can do by OBD using prog vageepromprogrammer 1.19 and simple KKL adapter.

[brend]

original dash 8H0920900C is broke
i have used dash with 100% same numbers

24C08 km-data is "crypted"
dash is RB4 from 2002

can it be learned with VCDS, or is ODIS (GEKO) needed ?

Thx for advices


For good job used dash need virgin then adapting .

[r4nd0mize]

I had a bad experience caused by a lack of knowledge on these clusters. ~~~~ed if up with a tool trying to read eeprom by diagnostic connector (OBD). Was able to fix it by simply teaching cluster back into the immo components. Was a struggle though, cause I just wanted to read eeprom for testing purposes :D

But: friends here are right, if you virgin correctly and then teach in there should not be a problem at all.

[AudiS4]

Use vag eeprom commander to pull both pins then use vcds to adapt this is the easiest way. If you get it wrong gonna need expensive tools to fix like dejavu.