Audi A5 2.5 TDI EDC15VM+ - 29F800 IMMO OFF

[Adam187a]

Customer changed fuel pump, ECU locked, original ECU has checksum error, so replaced ECU but this flash is a 29F800BT, so need immo off solution please. Any advice or software that can cover this? EEPROM already has immo off solution but the car does not start. Flash desoldered for full read. Thank you for any help!

EDIT: Solved, flash dump MUST be immo off as well as EEPROM

[alonedark]

a5??????? no have this but if you do inmo off only need adap in chanell 50 whiht old pin of the ecu

[Adam187a]

This ECU needs immo off in flash and EEPROM, it's an A6* accident in the title

[akidor]

Here you go :)