BSI Citroen Berlingo

[JSap2012]

Hello everybody,

I have a Citroen Berlingo with a BSI Siemens

S118085320 A
BSI E01-00
9649627780

I have problems with light, washers, and electrical windows, when I check the BSI is with a lot of corrosion and I have other that works correctly, it comes from a Citroen Picasso, but is the same reference.
It's possible change it? If it's possible, can anyone tell me what I need to do? I was looking in other threads and I see they copy the ST 95160, I only need to copy that EPROM?
It's the first time I change one device of this.

Thanks is advance

[Josue]

It is not always possible to make it work by cloning only the EEPROM, in most cases it is not enough and you have to remote code it with Lexia. If it is the same reference, make sure first that it belongs to a Xsara Picasso or to the same car model as yours, since many PSAs share a reference but you have to take into account variants such as the dashboard (digital or analog) because if not then they don't work .

[sergei5005]

If your BSI replacement is exactly same numbers of reference. Only need desolder 95160 eprom from old BSI and put in New Bsi and GO !!. or clone the 95160 Eprom . Other option is make a virgin BSI and reprogram with scan tool.

[sergei5005]

95160 virgin OK here.. You need read and SAVE original 95160 file ..exctract pin code from Original 95160 eprom and change this VIRGIN file. Reprogramm all with Scan tool...for you.

[JSap2012]

The original BSI is in very bad conditions, I'm going to copy the 95160 from the old to the "new" and then what I need do it?
I need do anything with the keys for start the car or it will starts?


If your BSI replacement is exactly same numbers of reference. Only need desolder 95160 eprom from old BSI and put in New Bsi and GO !!. or clone the 95160 Eprom . Other option is make a virgin BSI and reprogram with scan tool.