DELPHI VCI DS150 CRACKED

[wizz2c]

Hi all i was up till 3am testing this and finally got it to work this morning .this is what you have to do: read atmel at90ls2343 chip all save bin for backup!!! write this bin to chip ,run program ,help/licence/hw key then write hw key as in txt file . works 100% used it on various vehicles. have fun

NOTE:this is only tested on the delphi vci 150 not the others.

PASS FOR THE FILE IS delphi12321%%

[wizz2c]

Hi all i was up till 3am testing this and finally got it to work this morning .this is what you have to do: read atmel at90ls2343 chip all save bin for backup!!! write this bin to chip ,run program ,help/licence/hw key then write hw key as in txt file . works 100% used it on various vehicles. have fun

NOTE:this is only tested on the delphi vci 150 not the others.

pm for pass ,

[^^TommyTee]

congrats m8 and nice one for sharing the info

well done Tommy

[wizz2c]

congrats m8 and nice one for sharing the info

well done Tommy

Tommy not seen you in ages call by.

well took long ehh.

thanks go to all that contributed without them it may not have poss. NOW onto the multiscan.

[sl4ck]

coud you please explain better what's this for?

it's the VCI dump, cracked to work with delphi software?

What can this VCI diagnose and were can we find for what price?

Only found this:

DS150E - PC-Based version of DS100E - United Kingdom (http://dieselaftermarket.delphi.com/en-gb/products/diagnostics/DS150E+PC-BASEDVERSIONOFTHE+DS100E.htm)

[wizz2c]

coud you please explain better what's this for?

it's the VCI dump, cracked to work with delphi software?

What can this VCI diagnose and were can we find for what price?

Only found this:

DS150E - PC-Based version of DS100E - United Kingdom (http://dieselaftermarket.delphi.com/en-gb/products/diagnostics/DS150E+PC-BASEDVERSIONOFTHE+DS100E.htm)


its the bin file for ds150 vci for use with ds800e software as found on this forum. as for what the delphi ds150 device can do., please use google i cant do everthing:rolleyes:

[wizz2c]

for those wanting to know atmel location, please :wink:thank tommytee for pic i just edited it.

[wizz2c]

does anyone know if the bluetooth passkey is generic?

[wizz2c]

bluetooth passkey anyone please

[tytano1]

whether the atmel is locked?
please pass

[mastertoudi]

Is it working with dieselmax software too?

[bossixbv]

Do you know if its working with other types of interfaces. I have a Opus CMT and it looks exactly like the one in the picture you posted. Thank you for the good work you are doing.

[wizz2c]

Do you know if its working with other types of interfaces. I have a Opus CMT and it looks exactly like the one in the picture you posted. Thank you for the good work you are doing.


i am not sure only tesed on delphi vci i will try on cmt soon what software version of cmt are you currently running?

[bossixbv]

I think it is 2007 R3

[wizz2c]

I think it is 2007 R3

I'll be trying the cmt pro thats on the same version as yours when i get it next week keep your eye on this thread.

[mick711]

Just :

Autocom CDP , Opus CMT , Delphi DS100e DS150e , Wurth Snooper is exactly same hardware look the bin files with hexedit you can see CDP because the hardware is make by Autocom

[wizz2c]

Just :

Autocom CDP , Opus CMT , Delphi DS100e DS150e , Wurth Snooper is exactly same hardware look the bin files with hexedit you can see CDP because the hardware is make by Autocom ;)

Opus Autocom and Delphi have the same software or it's possible just delphi have flyrecorder but i don't know if it can be used with ds100 or 150 , i just see the old software of Wurth on 2007 and it's java software .

I think you can flash CMT CDP DS150/100 Snooper with this bin files and use Delphi software, i can see the key with hexedit but i don't know if it's possible to change because there have a seconde "key"

i also think that cmt and others will run with ds800 software but have not tested this yet so i cant say for sure. you mention hexedit, hex of the atmel is that? and what is this second key? got me interested

[ando026]

thank you works

[mick711]

No good for

[mechanior]

bluetooth passkey 0

[bossixbv]

Hi everybody. Just tried to read the Atmel today but without any result. You said it should be at90ls2343. I don't know if there are differencesbetween the different products. I have a Opus CMT and at the location indicated in the picture i have the following: ATMEL 0169/ TINY V45/ 1OSU. What am I doing wrong?
I appreciate any help that could get me further with this one.

[liketoseeu]

hi I have a delphi ds150 seen as unknown device on pc with USB do you know how to repair thanks.....

[bani]

(http://www.digital-kaos.co.uk/forums/members/6469-liketoseeu/)to "liketoseeu" => I can help you...

I have full dump of ATtiny45V, and eeprom 93C46.
Just need some info about serial number and entering activation key. Can anybody help me?
(http://www.digital-kaos.co.uk/forums/members/6469-liketoseeu/)

[szym31]

Hi everybody, that my first post that i sey too ALL HIIIIIIIIII.
I by few days ago CDP Scan an now I want upgrade the soft to CDP Pro. Can I use software from delphi ? sombady testet it? or Pls give me some info.
PS. What is in this file from wizz2c on first post on 1 page, I can not download.

[ss110]

Hi, I have the same problem, so please help.

[mick711]

one post :D

It's dump with serial of the DS150 hardware and info for full install software .

[szym31]

please pasword to bin file. I try save nad run soft from delphi on autocom

[asid12]

Hello all!

I would like to know password for binary file in archive.

BTW I try'd to do upgrade for Autocom software. I just copy from working PC software and replace one file from my old installation. Everything woks fine.

[mick711]

Hello all!

I would like to know password for binary file in archive.

BTW I try'd to do upgrade for Autocom software. I just copy from working PC software and replace one file from my old installation. Everything woks fine.

For password send MP and thanks button to Wizz2c .

Just what files you replace ?

Thanks

[diky]

Hi, can you tell us how and what changes you made to
the software please.

diky.

[asid12]

For password send MP and thanks button to Wizz2c .

Just what files you replace ?

Thanks

I copy from my old installed folder file "Installation.xml" for backup. Then make copy of already installed my friends installation and replace his "Installation.xml" file with my. And all things working.

[mick711]

I test monday for see if it work but i think no .
Have you test comunication with vehicule ?

thanks

[bani]

There' s already 1/2010 version.
working :) :) :)
If you need help just ask me ;)

[diky]

Hi, Yes any help would be good.Any idea's on where to get 1/2010 software.Also any idea's on how to make it work on cmt pro interface.(alot to ask I know ).

Regards diky.

[tytano1]

please password to file

[mick711]

Hi, Yes any help would be good.Any idea's on where to get 1/2010 software.Also any idea's on how to make it work on cmt pro interface.(alot to ask I know ).

Regards diky.


Delphi Europe Service Operations (http://europe.delphi-dso.com/) for download it's necesssary to have user name and password that i don't have .

On CMT Pro it's same hardware so it work if you have the Hardware key for your Hardware serial .

[bisnao]

Hi M8's

I have a Delphi DS 800 version 4.2.1 any Software update?
Help apreciated.

BR

[szym31]

why i cant update ds100 on autocom(CDP) interface ? I have connectoin error. The next is where is writed serial number in CDP ??? Any help please.

[bani]

where can I get "Diesel MAX" version? thanks

[chriscraft]

Please pass for file , i want to make a test in snooper inteface

[sefer67]

password ?

[antera]

thenkssss very good

[tomasandersson]

thanks for this

[nabilrifi]

this soft work with delpi ydt460? if not pleas help me

[adriani1978]

please pass
thanks!

[sidoski]

HI
I HAVE DELPHI DS 800
HAVE YOU GOT A BIN FILE FOR ATMEL WHIT GOOD SERIAL FOR ACTIVATE IT ?
THANKS
SID

[MCNexo94]

Hi all i was up till 3am testing this and finally got it to work this morning .this is what you have to do: read atmel at90ls2343 chip all save bin for backup!!! write this bin to chip ,run program ,help/licence/hw key then write hw key as in txt file . works 100% used it on various vehicles. have fun

NOTE:this is only tested on the delphi vci 150 not the others.


Hi mister please you have solution for me
I' have Delphi DS100E Serial number 37221
i'am donwload the last update this site v1.20
i'am install setup i'am choise DS150E i'am looking in all pdf no found serial for SN 37221 for Sofware in PC not in Pocket PC...
Thanks ;)

Please send me pass in mp

Sorry for my English i'am french

Best Regard.

[ma5terboy]

thank you very much

[OUTLET]

Pleace pass in pm
very good!
thank

[vova_mercedes]

Pleace pass in pm for bin
thank!

[markat]

WoW Snooper has the same Atmel 90LS2343, but it is located behind three pin led, and has white paint mark

[scanvec]

Hi mister please you have solution for me
I' have Delphi DS100 Serial number 31081 PART No: SV10185
i'am looking in all pdf no found serial for SN 31081 for Sofware in PC not in Pocket PC...
Thanks ;)

[markat]

Thanks one more time. Can i get Pass in my PM ?

[vova_mercedes]

if you need the password, wizz2c

[wizz2c]

if you need the password, write me.



if any pass is to be given should'nt it be me that sends it.:banghead:

[tapiru]

Hello to all
Please someone help me with serial for my DS100E S/N33159
SV10185 Rev4.1.I'am looking in Rune pdf but not find nothing good for me.Mention that since I buy in 2007 did made just one update with SD Card provided by dealer.Not other update and now I need made this.
Please help me someone!!!!!
Thanks in advance!

[vova_mercedes]

wizz2c, please send me the damp 93c46 for ds...e

[webmarc]

Has anyone tested it on W?rth snooper??

[radiodecoder23]

wizz2c,

please pass send me,
thanks...

[markat]

I tried, but I have no drivers for wow snooper, so I can't connect to device, but how to change serial number instructions ar right (I found serial number in the same place as in ADP). So I need or ADP bin file, or driver for snooper

[adriani1978]

hy where you find serial in adp?
thanks!

[maxiben]

bluetooth passkey anyone please

[maxiben]

......................

[wizz2c]

pass for file is delphi12321%%

[adriani1978]

licence for delphi 2/2010
http://www.rune.ro/DS_Update/DS800E.exe

[wizz2c]

i have created the bins and text files for both delphi ds150 and cmt pro. both tested and 100% working. version 2010-2 to marry the hardware to the software from adriani1978 post.please take the time to thank adriani1978 for the post.

have fun

[pecirepi]

thanks m8 great work ;)

[MCNexo94]

licence for delphi 2/2010
http://www.rune.ro/DS_Update/DS800E.exe

Hi mister

please i'am searching for DS100E license for my VCI SN 37221 no found in your file plase help me.

Thanks ;)

Best Regard

[polberto]

Please for DS100E license for my VCI SN 33222 Thanks.

[vova_mercedes]

Wizz2c
Hi I have a device DS800E I think that the key lies not in AT90LS2343 I took off and plugged the device without, and determines the number of my pribora.DELFI2010.CMT PRO2010, that UTB for faily instruktsyyu to them

[wizz2c]

Wizz2c
Hi I have a device DS800E I think that the key lies not in AT90LS2343 I took off and plugged the device without, and determines the number of my pribora.DELFI2010.CMT PRO2010, that UTB for faily instruktsyyu to them

I don't really understand your post, so I will try to help you understand better, your right the key is not in the EEPROM ,the serial number is what is stored in EEPROM as you should have already read in previous posts,hope this helps you.

[wizz2c]

D/post edited

[wizz2c]

For all those peeps wanting other serials and keys for other units eg ds100 etc. I have only tested this on ds150 and the cmt pro units which both work 100%, as I use both of these daily without issues.many thanks go to the members that posted the sw and hw keys as without them it wouldn't be poss. Note don't use the bins I posted on on the wrong unit ie cmt on a Delphi as serial is on diff address line.

[hmedski]

thnks wizz2c for all

[vova_mercedes]

Welcome to the firmware process was taken aback Atmela like what is happening as the software determines the device

[wizz2c]

Welcome to the firmware process was taken aback Atmela like what is happening as the software determines the device


ermm NO sorry still dont understand your post. if you have any USEFUL info feel free to share the knowledge .

[paraver]

Hi,

I didn't understand one thing.

This crack converts the ds150 to an ds800 or just changes the serial number to get the updates from somebody else?

Regards

[paraver]

Nobody answers me? did i say something wrong or i'm i beeing boring?

I have a ds150e with subscriptions, so i think i can also help with something.

[stiga]

Just stumbled upon this forum and I must say that it contains alot of valuable information. Thanks!

[adriani1978]

for paraver
just change serial number to get updates from somebody else

[b16eun]

Hi there does anybody know how to get past the expiry on the DS100E software?

[stiga]

Well this is how my board looks.
It?s a CDP with Wireless-LAN.

What is that chip I have, and are there any chance I?ll be able to reprogram it?

[vova_mercedes]

WIZZ2C
GOOD Morning I take my AT90LS2343 unable to read or programmed
can you have such a chip for me

[daviee]

WIZZ2C
GOOD Morning I take my AT90LS2343 unable to read or programmed
can you have such a chip for me


Hi !

Are you already find shop to buy AT90LS2343 ?

[bani]

Can I connect DS-100 to 24V truck?
I can` t find operating voltage.

[vova_mercedes]

can not find anywhere else AT90LS2343

[daviee]

Somebody have dump for wow snooper ?
90ls2343 is locked :-( can't read.

Thank you

[penio87]

Well this is how my board looks.
It?s a CDP with Wireless-LAN.

What is that chip I have, and are there any chance I?ll be able to reprogram it?


I have the same problem, Only tiny45v and there are no numbers

[ouss]

is this dump work with ATtiny45v ?
i need dump for ATtiny45v please help

[wizz2c]

is this dump work with ATtiny45v ?
i need dump for ATtiny45v please help

Cmt has the tiny 45 chip which works ok with delphi software, none of my chips were showing locked status i am using a dataman 48pro programmer.

[ouss]

thaks for your replay but i dont undestand "cmt" ???
i have a ds100e with ATtiny45v
my ds100e have 3 leds i think is the last version

s/n 33144 Part n? SV10185 rev 4.1

i have change th eprom with attiny85v et i have flash it with your dump but CPD is 20000
????????????????????????????????????????????

[markat]

Somebody have dump for wow snooper ?
90ls2343 is locked :-( can't read.

Thank you

I readed this Atmel, but it is locked for changing. So I've got other one with ability to write. But main problem - I didn't found drivers for snooper. I tried to write delphi dump, but computer still identificates it as snooper, and asks for drivers. As far as I have Launch and lot of specialized scanners, this project I marked, as "lost".

[Skitsverige]

I readed this Atmel, but it is locked for changing. So I've got other one with ability to write. But main problem - I didn't found drivers for snooper. I tried to write delphi dump, but computer still identificates it as snooper, and asks for drivers. As far as I have Launch and lot of specialized scanners, this project I marked, as "lost".


Its because the ftdi is programmed as that you need edit the ftdi chhip else it will be wrong recogniced.

[Skitsverige]

If people cant fix the vci or CDP message me in private or msn and i will help i have ready programmed chips with soft and activation keys 2010 ver 2 the pro ver and the pocket pc licence :)

[daviee]

i try with WOW snooper and Attiny 25 and now with AT90LS2343 ,but the same results.

On VCI test only :
CDP
Serial : 20000
eOBD: 207
ECU soft ver: 1230

:-( :hmmmm2:

any help are welcome

Thank you.

[adriani1978]

hy look here for serial in delphi ds150e
eprom tiny45v

[adriani1978]

serial is 33278

[daviee]

Strange...
I deleted some parts of 90ls2343 and still looking 20000 serial on the hardvare test :hmmmm2:
Attached the dump

[Skitsverige]

Strange...
I deleted some parts of 90ls2343 and still looking 20000 serial on the hardvare test :hmmmm2:
Attached the dump


You can remove the chip and look the magic same serial 20000 :thefinger:
Plz dont try all untested sulutions if you dont have loads of devices to destroy before you maby get a hint how to make it work :)



Just whant add if someone have success get serial 20000 and not solve it then my msn avalible in my profile and its allso my email :)

[linkthehero]

thx for this trick

[diky]

Hi, what happens if you try and run the new software on
your interface with the wrong serial numbers .will the interface be locked .I have copied the intstall folder from
my working cmt pro to the ds800 software and entered
the same hw key .Will the fimware be locked when I search for device??
I don't want to much up the interface if poss.

Regards
diky.

[florent]

Hi, thanks a lot for your forum! Does anyone can help me? I'm searching for my Ds100E key. VCI is 34462.
It is for the last update R2.2010
best regard,
Florent

[yakışıklı]

bu programı nasıl kullana bılırız?

[turbocip]

If i have Delphi DS150E
- S/N : 39746
- Part No :SV10185 Rev5.0

wizz2c - any solution for hardware Key ?
Thanks in advance to all.

[vova_mercedes]

Hi I did not get read or write AT90LS2343 want to return to the old version (02.2008) may be someone will tell how, by connecting the tester writes DS800E done step 1 and sleeps. Maybe someone is selling a new chip AT90LS2343

[turbocip]

try to search on ebay .
I see someone sell this chip

[vova_mercedes]

thanks I'll try WOULD WWW. hast

[daviee]

If people cant fix the vci or CDP message me in private or msn and i will help i have ready programmed chips with soft and activation keys 2010 ver 2 the pro ver and the pocket pc licence :)

Hello !

Are you have new info about your shippment? I don't get any tracking nr from you and the packet is still not here.

Thank you.
Br.

[daviee]

Someone bought from this guy : Skitsverige ?

I payed the chips 3 weeks ago,but he not sent anithing till this time...

[lari95400]

hello
anyone can help I cried the interface and dump his mid safe how to remove security number when I search interface it gives me 10 instead of 34226 help me

[daviee]

BEAWARE !!!

Don't buy anything from, this guy : Skitsverige
He Is a CHEATER !!!
I sent to him 120 EUR for ready programmed chips for Snooper,but he don't sent anything.After payment No answer to my email.... nothing.

The details of this cheater :

Sent to:
Kent M Jakobsson
Email:
zynga@skitsverige.se
"PAYPAL *ZYNGA"

[turbocip]

Oh My God !

[lagas]

I readed this Atmel, but it is locked for changing. So I've got other one with ability to write. But main problem - I didn't found drivers for snooper. I tried to write delphi dump, but computer still identificates it as snooper, and asks for drivers. As far as I have Launch and lot of specialized scanners, this project I marked, as "lost".

hello, did you got driver's for sooper? Maybe I can help you. I have snooper cd..., and laptop recovery partition.

But my device no communicating with BT or usb.

Pc and device with BT is peered. USB driver instaled. When need do wow-soft configuration and connect usb, when nothing do, communication error. Maybe it's doing because the license not extended?

thnak's for help.

[nvp_playboy]

I have Autocom adp 186 , with this serial 17908.
I need key .
Anybody can help me ?

[tytano1]

Delphi Europe Service Operations (http://europe.delphi-dso.com/uk2/downloads.html#pcsw)

[mick711]

tytano1 delphi don't have the software for ADP186 this tools have oscilloscope fonction and parallele mode for controle electric system ;)

[mick711]

BEAWARE !!!

Don't buy anything from, this guy : Skitsverige
He Is a CHEATER !!!
I sent to him 120 EUR for ready programmed chips for Snooper,but he don't sent anything.After payment No answer to my email.... nothing.

The details of this cheater :

Sent to:
Kent M Jakobsson
Email:
zynga@skitsverige.se
"PAYPAL *ZYNGA"




I can't contact to , but it's possible he is on holliday .
I just wait one week and try to contact .

Thanks for that if it's the reality because i would like to send to skitsverige my diagnostic tools for repair ( ADP186 cost 7500? in france )

[daviee]

Belive me,he is a cheater.
He don't send me nothing and don't send my money back.
Always send me PM message and say : tomorrow...tomorrow...

I go to Police ,maybe they can help.

[mick711]

Go to police because you would like a cracked hardware is not a very good idea ;)

If it's me i can because it's for repair a hardware but i don't know if polici can help us in europe for this little money .My harward cost 7500***8364; so it's for that i say thanks to you .

I'm sorry that this men is not clear .

I try to contact a men who live in sweden for know how kilometers to him .

See you

[ouss]

my ds100e have 3 leds i think is the last version

s/n 33144 Part n? SV10185 rev 4.1

i have change th eprom with attiny85v et i have flash it with your dump but CPD is 20000
????????????????????????????????????????????

[drivergabriel]

i have an autocom cdp. this guy: Skitsverige
also try to fool me!!!!

[branci2008]

need code for deplhi ds 100
software 02.2010
serial of vci 32732
thanks

[polberto]

need code for deplhi ds 100
software 03.2010, 02.2010
serial of vci 33222
thanks

[scanvec]

Hi wizz2c please you have solution for me
I' have Delphi DS100 Serial number 31081 PART No: SV10185
i'am looking in all pdf no found serial for SN 31081 for Sofware in PC and in Pocket PC...
Thanks ;)

[mut5]

Hi,
can you tell me how to set FuseBits in ATtiny45v?

[turbocip]

For DS150E with SN 34726 - we can get something ?

[Hedis]

The guy "Skitsverige" is alredy known by the police in Sweden....

[Hedis]

Thanks for that if it's the reality because i would like to send to skitsverige my diagnostic tools for repair ( ADP186 cost 7500***8364; in france )

Why don't you send it in to repair thru your dealer?
What has happed to it?

[Onwuka williams]

Hi every one pleas can someonehelp me with my delphi DS100E my VCI no is 33818 i upgraded it butlincenc key is my problem help please thanks alot il be very greatfull

[fane_81]

Hello . For everyone with problems on delphi when appears serial 20000. I can fix that problem butt must to come in ROMANIA for that with your Hardware Delphi , this procedure takes between 1-2 days is not some easy. More details on private

[nvp_playboy]

I am from Romania .....and i need help with this :
I have Autocom adp 186 , with this serial 17908.
I need key .
Anybody can help me ?

[szym31]

Hej everybody,

Im serching hw key to cdp pro serial 00226

[mick711]

Why don't you send it in to repair thru your dealer?
What has happed to it?

Just price for delivery to sweden 500? ^^ and for Silver**** a friend live at 10 kilometers .

I try to send my adp to COFIEM who have repair first time my ADP and i think disconect bluetooth connector .

For my distributor autocom say to me he would not like to continu with him :-( so i don't know now how can i buy update, Autocom send to me a email i try if my distributor don't continu with Autocom .

[ouss]

PLEASE A NEED A DUMP FOR 93C46

[ouss]

i think there is no one who have the solution to cdp 20000 problem with ds150e

[turbocip]

i Agree with you

[Solderer]

Hi everybody.
I tried to crack my DS150. But i have tiny45 nor s2343 on PCBoard. I tried to connect to IC by in-system programming mode and get nothing - chip ID is 00 00 00 (hex). Then I unsoldered chip and solder wires directly to IC leads and again cant read chip signature correctly. Its possible than my self-made programmer AVR910 is not compatible with this chip, but i will try to buy new chip and i need firmware dump. Can anybody help me with full dump?
Thanks in advance.
Constantine.

[fane_81]

i think there is no one who have the solution to cdp 20000 problem with ds150e

If you read what i said before you will see exactly ;) , just you thing ( i think there is no one who have the solution to cdp 20000 problem with ds150e ) ;)

[steppenwolf]

Can someone explain to me what this has to do with Wurth diagnostics?

[maxximum]

If anybody have problem with Delphi DS100/150 or DS550E or DS800, PM me. Can repair most of them, but i'm in Hungary.

[hbalazs]

Hi!
Here dump new 2010/3 soft.Work 100% Wery easy if blacklisted this serial number in new soft change serial in dump siple hexworksop valid serial number whit hw key!

[turbocip]

Try reupload .
Its corrupt file here/.

[hbalazs]

rename zip to rar extract ok

[turbocip]

Thanks ,
now its okie.

[kitachu]

I need help with my ds800e. Here is dump from at90ls2343 and 24lc64. Orginal serial is 30139. Thank you

[kitachu]

I need help with my ds800e. Here is dump from at90ls2343 and 24lc64. Orginal serial is 30139. Thank you
nodbody? on wich address is stored serial number? dump from ds150 and ds800e are different. when i remove 24lc64 i get serial number "10"

[argegsm]

Hi!
Here dump new 2010/3 soft.Work 100% Wery easy if blacklisted this serial number in new soft change serial in dump siple hexworksop valid serial number whit hw key!

hello please reupload DELPHI2010_3.ZIP

solved thanks

[nourdin]

please password to file

[adriani1978]

hy can help me with fuse for tiny45

[turbocip]

please password to file
the compressed file is not protected .

[adriani1978]

hy
i have licence for delphi 1 2011
i need a good dump for tiny 45v for delphi ds 150
and fuse for tiny45v
i need to repair my delphi and i give licence for 1 2011

[argegsm]

rename zip to rar extract ok

solved problem

[baner]

Really, guys, did someone ever tried to change serial number of those chinese clones of Autocom CDP?

I have chance to put hands on two of this, but on both cases I was unable to precisely identify ATMEL chip on board because in both cases it was SANDED very well indeed. :pcguru:

So both times i tried with settins for ATtiny45 and AT90l2334 but unsucessfully. I didnt receive any respond from chip.
WHo knows, maybe this sanded chips are not ATTINY or AT90??:tomato:

I also noticed that PCB is slighlty different (on those cloned CDP) compared with pictures of original AUTOcom CDP, this probably is result of higher revision of (3.1) of those chinese clones.

Just for info: both of those clones have same serial number: 3x250 (and use 2011.1 version of soft). Both were "CARS" version.

There is a rumor that "TRUCK" version is same (cars is also rated up to 34V!!!) but then we need other serial number, SO CAN ANYONE POINT US TO RIGHT DIRECTION??

How to change serial number of CHINESE CLONES OF AUTOCOM CDP?:joyman:

Regards and respect:D!

[turbocip]

If i copy my eeprom into another DS150 .... all will be ok ?
He can use interface with my SN and HW ?
Anibody know ?

[baner]

If i copy my eeprom into another DS150 .... all will be ok ?
He can use interface with my SN and HW ?
Anibody know ?

Yes, if you can succesfully read your attiny45 chip, then copy its content to attiny of that other Delphi DS150. Then you will have "Cloned" copy of your DS interface, with same HW serial number and same software key.;)

That is way similar to how chinese manufacturers create and update their cloned copies of Autocom CDp interfaces.:laugh:

Regards and respect!

[baner]

hy
i have licence for delphi 1 2011
i need a good dump for tiny 45v for delphi ds 150
and fuse for tiny45v
i need to repair my delphi and i give licence for 1 2011

Sorry, but I am just curios. Can you read attiny at PCB of your Delphi DS interface? If you can, (with ie ponyprog), then you can also read fuse bits?!

Regards and respect!;)

[turbocip]

what size should be have the read file? (.bin)
i want to have a correct file saved.

[szym31]

Hej all,

Any body try uplod delphi2010/3 and change bin file on CDP ? Plese give any answer. Thanx

[argegsm]

problems solved

[vovamercedes]

Let's restore the topic-what may be replaced as set AT90LS2343 fuzy what to pour flush

[vovamercedes]

:thrasher:Hooray I managed to change the number of the device, can now write to someone how to activate the new 2011.02 with the help of the stick

[lati]

Hello
Ans how die you changed it

[cosmind]

hello
please post fuse for tiny45v

RE: dont need any fuse settings...
erase and reprogram with good dump

[madmen]

I need help,i have new UPA programmer, I want to program ATtiny45, I need help, how do I connect upa? I need a diagram to help me thanks,please is important thanks advice

[madmen]

I need help,i have new UPA programmer, I want to program ATtiny45, I need help, how do I connect upa? I need a diagram to help me thanks,please is important thanks advice

solved problem :manuflag:

[daviee]

Looking the 2011_1 PDA version
Can somebody help me please?

Thank you.

[blackpirate]

i can activate autocom 2011.2 or 2011.3! and delphi 3.2011!

PM for details!

[ZIZZOU]

hi blackpirate (http://www.digital-kaos.co.uk/forums/members/54261-blackpirate/)
can can you activate delphi 3.2011 with keeping SN=30250?
becose i had activate it with other SN ,now the soft run on my computer but the SN of activation and the SN of my autocom is different
so,i can't use the soft with my autocom

[cosmind]

you can change SN by reprogramming ATtiny45

and STOP activating software via internet !!! if we block all SN, producer will change activation procedure and maybe next year we will need dongle for activate the software

[baner]

you can change SN by reprogramming ATtiny45

and STOP activating software via internet !!! if we block all SN, producer will change activation procedure and maybe next year we will need dongle for activate the software

If that continues, there is rumors from Delphi and Autocom, that they will change activation procedure THIS YEAR (2012), each VCI number will be accompanied with unique USB dongle (like TEXA or MAN software), that means bye bye to any updates!:toilet::y:

But you can't imagine how much people can be stupid, evel and greedy:stickyman:.

Regards and respect!:party:

[turbocip]

where is located SN in ATtiny45 ? (for change)

[vevepatronu]

it is an unusual sized 8 pin smd chip with markings on it from Atmel tiny45v on the line of the white led behind it

[turbocip]

Oki , i understand !

[michalez]

in other forum they said that "29F800 and (sometimes) Tiny45 need to be unsoldered and reflashed." it is truth?

[wizz2c]

in other forum they said that "29F800 and (sometimes) Tiny45 need to be unsoldered and reflashed." it is truth?

Yes its the tiny 45 you need to edit and nothing else. is all on this thread.

[wizz2c]

just for the knowledge base: i have just edited my vci's s/n again and using the update 2011 r3 and activated online following the software procedure without any probs.

[wizz2c]

hy
i have licence for delphi 1 2011
i need a good dump for tiny 45v for delphi ds 150
and fuse for tiny45v
i need to repair my delphi and i give licence for 1 2011

There are good bins on here already just edit
Serial and write your chip.

[wizz2c]

as requested. hope this can help.

[nikauto]

what programer did you use???

[turbocip]

Xprog or Uuprog its ok?

[autocargo]

Can you read attiny45 with upa? Can't find it in software.

[michalez]

my friend didnt read attin45 with upa. With xprog-M it is possible to read attiny45 ??

[madmen]

my friend didnt read attin45 with upa. With xprog-M it is possible to read attiny45 ??

no u need usb atmel programmer

[dimitar]

You need 2$ pony prog

[ticc]

para que pones lo archivo si es codificado..

[victor2k]

Can you read attiny45 with upa? Can't find it in software.
What version was used?
Look at the attach

[turbocip]

You can read with UPA ?
Can you attach image (in another .doc file) what socket use for read ATtiny45 ?
Thanks in advance

[morito]

What version was used?
Look at the attach


yes upa support this chip, but you can read?

i not can

regards

[dimitar]

GUYS stop bothering, Use this PonyProg - Serial device programmer (http://www.lancos.com/prog.html) . The hardware costs 2$ and the software works flawlessly .I use it all the time reprograming my xprogm,vcds,immo emulators,.....i use it everyday. It makes more money than my beeprog seeprog xprogm,bdm100......... JUST read the manuals,,,,no need for sockets just solder wires on a bare chip flying around your desk:laugh:..


P.S. Flashit is the worst crap of software ive ever been working with

[carsoftobd]

Hello
I need fuse config for attiny45, main pcb is rev 3.0 year 2004 autocom china 1/2011.
Thank's in advance

[somhali]

Hi

where I can down 2010 3 (ds150e Rev. 4.1) ?

thanks

[yanni8]

Can you give me the password ?Thanks!

[turbocip]

Password for what?

[spider-wifi]

hi,

I try dumps for tiny45 but do not work :/