VW T6 XT27B MQB48 chip problem

[checka]

Hi everyone, need help with key programming on vw t6 2018. Its my car, got 2 original keys and I want program good quality, heavy xhourse key in it. With remote no problem, but it recognized original mqb48 chip, i have xt27b and xt1m chips, but no luck, vvdi2 show id error when I make dealer key. How can I solve it?

[Maartinj]

2018 T6 match remote while immo programming, so you cant do a separate,

[checka]

2018 T6 match remote while immo programming, so you cant do a separate,
Remote is already working, immo chip is separate. xt27b can be switched to mqb48 type but "make dealer key" not working
How can I convert cluster immo to work with id48 chip?

[figani]

2018 T6 match remote while immo programming, so you cant do a separate,

yesterday done two differnet T6...
one 2017 another 2018...
but remote I had to do seperate...
used XS keys...

[mjoesen]

Another user at this forum (I do not remeber who) told med that it possible to program separate remote up to 06/08/2018.

[checka]

Another user at this forum (I do not remeber who) told med that it possible to program separate remote up to 06/08/2018.

Remote is not a question, how can I program separate chip into it

[mjoesen]

I use this chip:

https://remkeys.com/product/megamos-aes-mqb-transponder-audi-volkswagen-seat-skoda-tpmaes/

[musti418]

Hi everyone, need help with key programming on vw t6 2018. Its my car, got 2 original keys and I want program good quality, heavy xhourse key in it. With remote no problem, but it recognized original mqb48 chip, i have xt27b and xt1m chips, but no luck, vvdi2 show id error when I make dealer key. How can I solve it?
I had success with zedfull on this tool. I used mqb 48 chip.

[checka]

I use this chip:

https://remkeys.com/product/megamos-aes-mqb-transponder-audi-volkswagen-seat-skoda-tpmaes/

Already on the way to me, xhorse xt27b and xt1m not properly working as mqb48 as I understand

[autoTkey]

The question is - can XT27B and XT1M be made to work as MQB88 and MQB48 or only one of the modes is possible and which one?

I know it writes MQB48 in the ads but I'm not ready to trust on writings in ads. Hopefully someone writes feedback here if he has the opportunity to test.

[checka]

So, XT27B, XT1M and mqb48 chip (chip with coil) not working by me. VVDI2 sayd fault in cs and not generete dialer chip, it saves like FFFFFFFC and not recognized. Without problem I can add mqb48 normal keys. How can I convert dash to work with ID48 chips?

[checka]

Done by changing configuration of dash to work with ID48

[Supas]

Remote is already working, immo chip is separate. xt27b can be switched to mqb48 type but "make dealer key" not working
How can I convert cluster immo to work with id48 chip?


Editing the configuration in inmodata


Or using the mqb48 chip directly... there are them in glass format or pcb type with coil