Mazda 6 2.2 Skyactiv Denso SH06 DPF OFF White smoke trouble

[popov]

Hello , i have a trouble with Mazda 6 2.2 Skyactiv 175hp.

IDENT: SH06-18881-T
SW: SH06-188K2-T
Type: SH06-188K6-
HW: SH06-188K1-B
PN: SH06-18881-K

After CUT and DPF EGR OFF the car make a lot of white smoke on exhaust. Tried Swiftec and manual solutions but the result is same. 4 injectors are brand new and coded - no difference than before.
EGR is blanked / coolant side and exhaust side/ because i think coolant is going thru EGR to Intake - no difference.
Sometimes is working good but when you touch the acclerator pedal it is starting to raw idle and white smoke.
Temperature and differential pressure sensors are disconnected.

Attached are original , swiftec and manual solutions. Will be thankful if somebody can help.

[Rob6144]

hi mate have you checked the exhaust cam for wear and pulled the cam cover to check for carbon build up ? only other thoughts are is the cat still present ? finaly ive seen alot with turbo ware and the smoke is often caught by the dpf ive actually seen the smaller turbo have the shaft failed and not a drop of smoke with dpf equipped

[jacekzam78]

hi i have the same problem mazda cx-5 2015 2.2 skyactive ,dose anyone have a solution ???
starts drive normal at a standstill at 3500rpm white smoke
Thanks

[qni666]

hi i have the same problem mazda cx-5 2015 2.2 skyactive ,dose anyone have a solution ???
starts drive normal at a standstill at 3500rpm white smoke
Thanks

i have - manual solution :)

[jacekzam78]

i have - manual solution :)
Sa how to fix this problem ??
Thanks