cardiagggooo
28th October, 2022, 04:30 AM
V22.10.01 KT200 software, tried to update but it said "New version found, start updating !"
Solution:
Download the latest software below to update. (software version will remain the same after update)
1.Do Not connect device, and run "Renew Driver"
2.Connect device, run "Update Firmware" (Do Not disconnect USB cable during update)
3.Run "Setup", run "KT200.exe"
Solution:
Download the latest software below to update. (software version will remain the same after update)
1.Do Not connect device, and run "Renew Driver"
2.Connect device, run "Update Firmware" (Do Not disconnect USB cable during update)
3.Run "Setup", run "KT200.exe"