Bmw Cas3++ key file type codes

[binary420]

Hello ,
I have a 2008 e92 m3 with a key that is being recognized by the car as "key 1"

In the car key file which lists the 10 keys
(link below)
Each immodata line is prefaced with a key type identifier code which signifies what type of key it is.

I think it was a vvdi or similar manual, I read somewhere that these identifier codes should be:
002b00, (spare key/chip key)
004b00, (remote key/semi smart key)
005b00 (smart key)
And in the same manual, it said something about prefacing it with an F for some reason I can't recall exactly why. so with the F they looked like F02B00. F04B00, T05B00 IIRC.

Also, the remote data lines look like there is some repeated data shared between them. particularly the last few digits. Ending in 001, 002, Or 006 possibly,?

Also. I believe new. Unused slots should be labeled with 107608 or F17608 or something similar to that code. Again with or without a starting F.


Can anyone steer me in the right direction regarding why my car would be recognizing my key (key1), and cranking engine, but refusing to start the engine?
The comfort access works to turn on ignition works to unlock door with the handle, and also the remote locks/unlocks the doors.
But when I press power button it just cranks but will not start

The best I've managed to come up with so far Is these key identifier codes.

Since the x431 xprog3 programmer I'm used appears to not follow the same code but very close.


But beyond that that's all I was able to find in thia regard

Please what am I missing here?
923078


ImmoData_Key1:025300616E399C662FA9FE9E37C8C3247428

RemoteData_Key1:EE48662FA9FE9E37F60A86F8010006

ImmoData_Key2:F07608FFFFFFFF924DCC121874C8490F6D2E

RemoteData_Key2:212F924DCC12187417243D86010002

ImmoData_Key3:F07608FFFFFFFFBB069A784966C826FF1283

RemoteData_Key3:15C2BB069A7849663F8E31AE020001

ImmoData_Key4:F17608FFFFFFFF50D01B53017BC8629FAA87

RemoteData_Key4:BB4050D01B53017BC9FB759D030001

ImmoData_Key5:002B001E98869DF5875F626121C8DF677DDD

RemoteData_Key5:142AF5875F62612177A278B7030006

ImmoData_Key6:F17608FFFFFFFF5BC7545A443BC8FD0EE8FA

RemoteData_Key6:EEC45BC7545A443B0D5BE660030001

ImmoData_Key7:F17608FFFFFFFF2C72F08DA212C8273813FB

RemoteData_Key7:FD762C72F08DA212D27BD22A030001

ImmoData_Key8:F17608FFFFFFFF6E9E2E6773A0C82A483ADC

RemoteData_Key8:313C6E9E2E6773A0155956E8030001

ImmoData_Key9:F17608FFFFFFFF3190E15B0BF1C839CEE458

RemoteData_Key9:A1ED3190E15B0BF1718FBAC3030001

ImmoData_Key10:F17608FFFFFFFFE62209F4B460C8C1918E4 3

RemoteData_Key10:EBEFE62209F4B460A007C1BB030001

[tirnanic malisa]

Are there any errors in the engine computer and did the car start before that, what did you do on that car, did you add a new key?

[binary420]

All keys lost, so I added a key and it is recognized by car keyless, and also plugged into slot.

But will not start, just cranks.

I did a hell of alot to this car, it has been down for going on a month or more.
Up until last night, it wouldn't even detect any key, and no keyless key was working either.

Car has just been parked in front of my house and unlocked!! Hint hint to any car jackers out there.

I updated the dme and read the cas on bench, and used cas3 editor to confirm its not corrupt

I also took a full backup of mss60 engine ecu with mss6x flasher, injected a rsa bypass, and modified a byte in the hex to turn off immo synch with the cas.

I've done everything I can possibly think of and still it will not start.

The car was running perfectly a month ago
My key quit being detected by cas, which is where my issues started

Now it's back to recognizing the key and even comfort access is working

[kiszka]

All keys lost, so I added a key and it is recognized by car keyless, and also plugged into slot.

But will not start, just cranks.

I did a hell of alot to this car, it has been down for going on a month or more.
Up until last night, it wouldn't even detect any key, and no keyless key was working either.

Car has just been parked in front of my house and unlocked!! Hint hint to any car jackers out there.

I updated the dme and read the cas on bench, and used cas3 editor to confirm its not corrupt

I also took a full backup of mss60 engine ecu with mss6x flasher, injected a rsa bypass, and modified a byte in the hex to turn off immo synch with the cas.

I've done everything I can possibly think of and still it will not start.

The car was running perfectly a month ago
My key quit being detected by cas, which is where my issues started

Now it's back to recognizing the key and even comfort access is working
place the files read