PDA

View Full Version : Toyota Corolla transponder



Willinickersen
6th November, 2022, 07:54 PM
Hi, I am struggling to find correct transponder for Toyota Corolla 2008 /E150. The car have ordinary key but customer says it had remote for doors.
All Keys Lost and I've already fixed key code and have cut the key. Key is okay and turns on IGN.
As I understand, it should be DST80 bits G-chip from 2008 - 2014.
Someone on this valued forum who have some experience with Toyota keys?

Looking forward for any suggestions!

alhengary
6th November, 2022, 08:23 PM
2008-2010 is 4d67 2011 -2012 id G

Willinickersen
6th November, 2022, 08:25 PM
2008-2010 is 4d67 2011 -2012 id G

Okay, this show other

alhengary
6th November, 2022, 08:29 PM
its 4d67 but to make sure send vin

Willinickersen
6th November, 2022, 09:00 PM
its 4d67 but to make sure send vin

AHTLB56E003023593

alhengary
6th November, 2022, 09:31 PM
use 4d70 >>>>>>>>>

Willinickersen
6th November, 2022, 10:18 PM
use 4d70 >>>>>>>>>

I have tried to make key with 4D 70 and I have tried to log in with XTOOL X100 pro2 without any success too... No connection... I belive immo box is locked?

super jumbe
7th November, 2022, 10:31 AM
I had similar issue with Avensis 2009 tried every trick had to remove dash and remove immo box and wrote virgin dump with 4D70 worked, you need someone with Corolla virgin dump.

Willinickersen
7th November, 2022, 01:22 PM
Thank you very much :biggrin:

ray-ray
8th November, 2022, 03:12 AM
It a dot key, do a battery reset. After reset do 4-13 for 35 min. Grounding the obd2 dash should flash red,green,and yellow. After that you should have communication.

Willinickersen
8th November, 2022, 08:35 AM
It a dot key, do a battery reset. After reset do 4-13 for 35 min. Grounding the obd2 dash should flash red,green,and yellow. After that you should have communication.

Thank you very much for your answer!
Not sure what "dot key" is... :nob:
The battery have been "dead"..not sure other way to have reset the battery .. I will try to jump OBD PIN 4-13 for 35 min.

super jumbe
8th November, 2022, 10:53 AM
I tried OBD PIN 4-13 for 40 min did not work just do as I said on page #8.

Willinickersen
8th November, 2022, 01:38 PM
I tried OBD PIN 4-13 for 40 min did not work just do as I said on page #8.

:beguiled:
Thank you again for answering! I will try to remove immo box

ray-ray
9th November, 2022, 01:32 AM
First generation (4C) no marking on the oem blade 1997-2003
second generation (4D) there a dot marking on the oem blade 2004-2011
third generation (G-72) there is G stamp on the oem blade 2012-2017
four generation (H) there a H stamp on the oem blade 2018-present

these list is for the USA region, note there a few models that are behind ie: 4runner

Manta1600
9th November, 2022, 01:52 AM
This one for sure is 4D70 so take out the dash and do the key on bench - No need virgin dump

don't waist your time by OBD

Willinickersen
9th November, 2022, 06:04 AM
This one for sure is 4D70 so take out the dash and do the key on bench - No need virgin dump

don't waist your time by OBD

Thank you very much for your answer! Including #ray-ray

Willinickersen
11th November, 2022, 08:37 PM
This one for sure is 4D70 so take out the dash and do the key on bench - No need virgin dump

don't waist your time by OBD

I cannot find the immo box... I can see and feel a little black box behind the ac, but I cannot pick it up...

liri
11th November, 2022, 08:43 PM
the and the box friend, but you find a long screwdriver and force it out

Willinickersen
12th November, 2022, 11:12 AM
the and the box friend, but you find a long screwdriver and force it out

Hmmm okay, feel stuck with something

Willinickersen
13th November, 2022, 12:40 PM
Now I've read immo box but I have no tool to edit the master key in file. I have tried carprog genuine without any success..
Someone can help edit the file?