Peugeot 3008 II: need to change Ecu MD1CS003

[paskuale]

Hello mates,
I have a Peugeot 3008 II year 2019 with damaged MD1CS003 Ecu.
It have P06B8 active fault (Internal Error) and car have some problem.
Sometimes engines stop during driving, other times AutoTrans does not working...

So I want to change the ecu.
I have a replacement MD1CS003, same hardware and same part numbers.
I have PINS of both ecus.

As I know, is not possible clone this ecu at present time.
I don't find any solution to change the pin in ecu.

Is it possible to learn used ecu to my car with PIN ? Without change pin in BSI and make new keys of course.

Or the only possible way will be immo-off with emulator ?

Thank you for the information.
Best Regards

[carloxgsxr]

if you can put PSA PIN FINDER
If you know the pin of the replacement ecu you put it in the 24C2 and directly start with the old key.
Without changing BSI

[paskuale]

if you can put PSA PIN FINDER
If you know the pin of the replacement ecu you put it in the 24C2 and directly start with the old key.
Without changing BSI

Yes I know this way, many emulator producers have this solution (put ecu pin in eeprom emulator and start the car).
But I was interested in OEM-solution.
The only original solution seems to change pin in BSI-ELV and make new keys.

[Le-Mans]

or make immo off ecu without emulator :pride:

[paskuale]

or make immo off ecu without emulator :pride:

Immo-OFF on MD1CS003?
By file?
Is it possible now?