syncro bmw e90 cas2 dde

[tipoune2002]

hello help me to syncro cas with dde
with all diagnostic work
thank for your help

[kiszka]

hello help me to syncro cas with dde
with all diagnostic work
thank for your help
https://mega.nz/file/AvRk1AwJ

[tipoune2002]

https://mega.nz/file/AvRk1AwJ

NOT WORK BUT IT S ME EN ERROR WITH MY DUMP
DUMP OK HERE

[tipoune2002]

NEW DUMP OK
FULL ORI

[kiszka]

NEW DUMP OK
FULL ORI
https://mega.nz/file/cyZnSbLa

[tipoune2002]

NOT WORK
FAULT CODE SYNCRO IN DDE

[kiszka]

NOT WORK
FAULT CODE SYNCRO IN DDE
I did the initial synchro, you have to re-synchro after the obd

[tipoune2002]

OK I TESTE
THANK

[tipoune2002]

hello
I still can't get the sync in obd
no fault in the car, just in the engine ecu, the syncro to do
syncro cas=evl ok
test with istap and ista d ,autel,abrite (syncro not possible)
Does anyone have any idea where I can find where the problem is coming from?

[issam216]

check may be you have some broken wire between cas and ecu that prevent you to communicate with engine ecu.

[aceton]

How it happend ?
Flat battery ?
Water in car ?
Disconnect IBS

[tipoune2002]

there was nothing
in the morning the car no longer starts and syncro fault in case
ignition ok unlocking steering wheel ok

[tipoune2002]

is it possible to controle my dump cas and dde
corrupt.....?
thank for your help

[issam216]

try to write this eeprom file to you cas module and report please , can you explain car situation when arrived to your shop

[tipoune2002]

teste not ok
synchro imposible