Need to synchro MAZDA 3 DASH - ECU

[LINKUNCOOL]

Hi ,guys

Would anyone help me to synchro a MAZDA 3 INMO.

Car can't start after battery replaced by INMO problem.

Attach DASH 93CS56 + ECU 95320.

Thanks in advance.

[cascais]

Here no pass try and report


If ok Press Thanks an Rep Buttons

[LINKUNCOOL]

Thanks , Let me try it later and feed back

[kiszka]

Dziękuję , spróbuję później i podzielę się opinią

it won't be okay

[cascais]

Kiszka in my program says sync ok and change the dump but you maybe right i tryed donno if its gona work but if you have an better solution i thank you too for helping me getting better :D

[kiszka]

Kiszka in my program says sync ok and change the dump but you maybe right i tryed donno if its gona work but if you have an better solution i thank you too for helping me getting better :D
no one before me did the mazda 3 here, I did it first everyone who is doing now got help from me and saw what to change and they probably think they already know everything, but Still, I do not bother them
some beetroot found a list how to put data in the dash and thought he grabbed the mazda by the horns, figuratively, and wrote a program that is worth almost nothing, more than that, it can cause more problems than help, but this is only my judgment
This program shows how many keys are programmed into the dash

anyway, I wonder why the reading of the dash is so nameless what is wrong with it

how can your solution walk if the problem is ecu side tell me

the author of the topic used all the ideas
and ran out of new ones and thought he would ask us for help
but if that was the case, now without dash and ecu repair, remote assistance will be almost impossible


Many people think that if IDS or Forscan they have, that they caught the deer by the horns but it is not quite
There were also those who laid out on it, until I showed them what to change

[gwiazdamb]

Hi
You are right Kiszka most of the loss of synchro is spreading over the ECU
most of the time there is a problem with reading the output code .Regards

[kiszka]

Hi
You are right Kiszka most of the loss of synchro is spreading over the ECU
most of the time there is a problem with reading the output code .Regards
I think here the board is in poor condition and ecu
and I do not know what to do with it because there is no one to admit how this damage was created and what modifications it has made
and it doesn't make sense to mess around with your files aimlessly
therefore there is point 3 in my signature

[gwiazdamb]

I think here the board is in poor condition and ecu
and I do not know what to do with it because there is no one to admit how this damage was created and what modifications it has made
and it doesn't make sense to mess around with your files aimlessly
therefore there is point 3 in my signature


An environmental interview on previous repairs is 95% success and reduces repair time

[kiszka]

An environmental interview on previous repairs is 95% success and reduces repair time
unfortunately that is exactly the case

[kiszka]

Hi ,guys

Would anyone help me to synchro a MAZDA 3 INMO.

Car can't start after battery replaced by INMO problem.

Attach DASH 93CS56 + ECU 95320.

Thanks in advance.
I checked, the dash reading is corrupted, read again

[LINKUNCOOL]

The dump was bad read.
Would you do synchro againe .
Let me try it ,if works

[LINKUNCOOL]

The eeprom of DASH was bad read.
I will try it with the new synchro file if works o no.
If not ,i will do Ids PARTS FUNCION.

[kiszka]

I will do Ids PARTS FUNCION.
you are a little too confident, may you
-----------------------------------------------------------------------------------
I'll give you my file, check if it works
https://mega.nz/file/lvIyDYAB

[cascais]

you are a little too confident, may you
-----------------------------------------------------------------------------------
I'll give you my file, check if it works
https://mega.nz/file/lvIyDYAB

you are right kiszka the ecu file is not correct again ....
is it not bad read its something else.......

[kiszka]

you are right kiszka the ecu file is not correct again ....
is it not bad read its something else.......
you are right but i suspect a more serious problem with the ecu
but the author of the topic is as silent as a grave
so he got an ecu check file, and we'll see what happens
and then I will know what to tell him next

[cascais]

you are right but i suspect a more serious problem with the ecu
but the author of the topic is as silent as a grave
so he got an ecu check file, and we'll see what happens
and then I will know what to tell him next

because in my programmer the ecu dump is bad the dash is ok i guess but the error is in ecu dump right??

[kiszka]

because in my programmer the ecu dump is bad the dash is ok i guess but the error is in ecu dump right??
I'll tell you when I get a reply message after the control file
fortune telling is pointless

if he wants to leave a message here because I saw his topic on another forum
and there he also received help but not from me

[cascais]

I'll tell you when I get a reply message after the control file
fortune telling is pointless


ok you are the best :)




im worried about doing a DENSO RF5T of an mazda 6 to egr off i have no programs to do it and nothing to read it unless i take the 29FB400 out
got any ideas?

[kiszka]

ok you are the best :)




im worried about doing a DENSO RF5T of an mazda 6 to egr off i have no programs to do it and nothing to read it unless i take the 29FB400 out
got any ideas?
if you take out the flash bone and use a read and write programmer
and you process the flash correctly, nothing can happen
if you don't damage the ecu while extracting the flash dice from the ecu
just don't forget to check if it is read correctly

[cascais]

if you take out the flash bone and use a read and write programmer
and you process the flash correctly, nothing can happen
if you don't damage the ecu while extracting the flash dice from the ecu
just don't forget to check if it is read correctly

can you egr off that car?

i have no way to do it i can read and write the 29fxxx via beeprog

[LINKUNCOOL]

THANKS GUYS

[LINKUNCOOL]

Just for try with the tools i got attempt to solve problem.
i got no experience in MAZDA , should be similar like FORD i thought
You should solve a lot problem like this one .
Thanks ,I will try it later and feed back .