View Full Version : Renault Megane Crash Clear
zanovo
4th March, 2010, 09:30 PM
Hello!
Please help me to clear crash in SRS module Renault Megane 2008 Autoliv 610627800 95640.!
I have a few attempts with the help of the dumps from this forum, but no mistakes and SRS lamp is on.....
juozas10
4th March, 2010, 10:34 PM
Hello!
Please help me to clear crash in SRS module Renault Megane 2008 Autoliv 610627800 95640.!
I have a few attempts with the help of the dumps from this forum, but no mistakes and SRS lamp is on.....
Hi.
What is you diagnostic device???
Best regards.
zanovo
4th March, 2010, 10:46 PM
Launch X431 (the latest update)
juozas10
4th March, 2010, 10:56 PM
Launch X431 (the latest update)
Launch X431 with SUPER-16? or not?
Best regards.
zanovo
4th March, 2010, 11:00 PM
With Super-16 - work good!
But it`s no problems with CAN-II ......also work correctly with French cars!
I use Super-16 for this job!
zanovo
4th March, 2010, 11:06 PM
Just now I receive algo for crash clearing in this tipe of moduls!!! Can you check?
000FA0 =>FF
0010A0 =>00
0012A0 =>FF
0013DF - stop
juozas10
4th March, 2010, 11:12 PM
With Super-16 - work good!
But it`s no problems with CAN-II ......also work correctly with French cars!
I use Super-16 for this job!
It was good...the problem of damp hotfix...
Best regards.
zanovo
4th March, 2010, 11:20 PM
It was good...the problem of damp hotfix...
Best regards.
Thanks, juozas10 ! It`s obvious for me!!
I need help just in dump correcting!
juozas10
4th March, 2010, 11:23 PM
Just now I receive algo for crash clearing in this tipe of moduls!!! Can you check?
000FA0 =>FF
0010A0 =>00
0012A0 =>FF
0013DF - stop
No good.
Best regards.
zanovo
4th March, 2010, 11:28 PM
No good.
Best regards.
You kill me! It was my last hope! :-))
GolfmkI
4th March, 2010, 11:30 PM
What error code do you have exactly, Some months ago I have a similar problem, and I solved by configuring airbag ecu with renault can clip, if not ligth doesnt go off!!!!!! This was in my case...
If not I cant help you anymore, I am a newbey in airbag clearing.
juozas10
4th March, 2010, 11:31 PM
Thanks, juozas10 ! It`s obvious for me!!
I need help just in dump correcting!
Try this two dumps, write back if it works.
Pass.P.M.
Best regards
zanovo
4th March, 2010, 11:33 PM
What error code do you have exactly, Some months ago I have a similar problem, and I solved by configuring airbag ecu with renault can clip, if not ligth doesnt go off!!!!!! This was in my case...
If not I cant help you anymore, I am a newbey in airbag clearing.
Can you give me the dump from 95640 (after solving the problem with Renault Clip) ?
GolfmkI
4th March, 2010, 11:39 PM
I will try, tomorrow I will try to locate the car and read dump.
Ill promise you :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.