MED17.1.6

[Newmotors]

Hello friends. i have a passat CC 2011 V6 Med17.1.6. the original module died but I was able to read the flash+eprom files. i bought a module with the same numbers and specifications, my idea would be to record the flash files and read eprom in the original and move on to what I bought. I did the recording of eprom+flash with PCMTUNER and nothing happens, I have immobilizer active in the dashboard and the car does not work, I was told that med17.1.6 does not clone , would anyone have any idea ? CAN I PAY FOR HELP!!

[nunoauto]

Send pm with files

[Newmotors]

927784that's the module model

[Newmotors]

Files ecu ori + new ecu

[nunoauto]

New ecu immo off flash. Please correct checksum when write

[Newmotors]

your file works the car , but in the dashboard I have the message 'imobilzador active

[nunoauto]

Here file epr

[Newmotors]

no new friend, same thing

[alex_r_2001]

your file works the car , but in the dashboard I have the message 'imobilzador active

IMMO OFF not good option if this car is daily driver (if for racing or for anything other than daily driver then immo off fine) , because with immo off will have fault codes for internal error with ecm also A/C and other misc stuff will not function properly...

There is way to do immo off properly but mpc flash and dflash need to be properly modified...


here is a video that i did a while back on a similar but not the same ECM part#

(https://youtu.be/DuTsgFifb6E)


Correct way is to transfer immo data from Original to Donor ( not clone )

Goodluck..... I wish I could've helped but I am currently on Vacation until Middle Of February ....................................

[jokir]

Test and report

[FcTSolution]

pm me i can clone without problem

[Newmotors]

update, Bought tokens to use on this site to make the clone , I attached the two files and it generated me an eprom file ... I am trying to record with PCMTUNER and nothing happens , do I need to record with KTAG ORI or other device that will record the areas of OTP ?928073

[Newmotors]

Jokir thanks for wasting your time doing this for me, but it also doesn't work. today we tried with the online odis and also did not work .. I'm suspicious that this module I bought recorded another file in it and changes the otp area so it's not working. now I'm out of ideas

[FcTSolution]

This work 100% :)

[jokir]

Test new file

[Newmotors]

a question jokir . I leave the flash file of the module that I bought and record this on eprom ?

[Newmotors]

a question jokir . I leave the flash file of the module that I bought and record this on eprom ?

[Newmotors]

still did not work , the stranger who i went in with the ODIS and appears to me so928181928182

[jokir]

Use flash donor and new eep.

[FcTSolution]

just write eep.

pass pm

[Newmotors]

SORTED OUT!! A member of the forum called VAGSERVICE helped me write a file in the module and it worked ok. it was showing a failure of CKS P160A and constant epc light. I tried to remove it from the module but without success. Then I had the great idea to remove P0606 and P160A It disappeared thanks to everyone involved and to Vagservice