bry70
5th March, 2010, 02:32 PM
Ive been looking at corsa c , 2003 year ,+ a non starter.Its a 1.2petrol with bosch ecu 0 261 207 962.
OP-COM - KW2000 Communication Window> 2003|Corsa-C|Body|Immobiliser II
B3040 - Communication Malfunction on W-line
(00) - Present
B3059 - No Engine Request Received
(00) - Present
-------------------------------------------
OP-COM - KW2000 Communication Window> 2004|Corsa-C|Body|Body Control Module
U2105 - CAN-Bus no Communication with ECM (Engine Control Module)
(00) - Present
---------------------------------------------
OP-COM - KW2000 Communication Window> 2004|Corsa-C|Chassis|ABS8/ESP8
U2105 - CAN-Bus no Communication with ECM (Engine Control Module)
(04) - Present
--------------------------------------------
OP-COM - KW82 Communication Window> 2004|Corsa-C|Body|Instrument
00174 - Coolant Temperature Wrong Signal
Present
----------------------------------------------
None of these faults will clear, ive checked clocks for loose plug, checked+run an earth to ecu. I cant access engine ecu,only the above ecus.
Spoke to main dealer+ tech. reckons im probably right condeming engine ecu(any problems on W line (german for immobiliser) is always engine ecu).
Anyone had same faults ?, im going to send off ecu , but ?50 to test +not many companies will look at this ecu. So i thought id post this out of curiosity.
OP-COM - KW2000 Communication Window> 2003|Corsa-C|Body|Immobiliser II
B3040 - Communication Malfunction on W-line
(00) - Present
B3059 - No Engine Request Received
(00) - Present
-------------------------------------------
OP-COM - KW2000 Communication Window> 2004|Corsa-C|Body|Body Control Module
U2105 - CAN-Bus no Communication with ECM (Engine Control Module)
(00) - Present
---------------------------------------------
OP-COM - KW2000 Communication Window> 2004|Corsa-C|Chassis|ABS8/ESP8
U2105 - CAN-Bus no Communication with ECM (Engine Control Module)
(04) - Present
--------------------------------------------
OP-COM - KW82 Communication Window> 2004|Corsa-C|Body|Instrument
00174 - Coolant Temperature Wrong Signal
Present
----------------------------------------------
None of these faults will clear, ive checked clocks for loose plug, checked+run an earth to ecu. I cant access engine ecu,only the above ecus.
Spoke to main dealer+ tech. reckons im probably right condeming engine ecu(any problems on W line (german for immobiliser) is always engine ecu).
Anyone had same faults ?, im going to send off ecu , but ?50 to test +not many companies will look at this ecu. So i thought id post this out of curiosity.