Godiag GD101, VNCI J2534 Nano

[torzet]

Godiag GD101, VNCI J2534 Nano
New interfaces from aliexpress.
Are they worth anything.
Do they work like openport 2.0
Can work with GDS2, ODIS, Consult 3+.
Maybe someone has experience with this

[boner200]

Been looking at this too bud, couple of videos online but not seen Odis working yet

[torzet]

According to user feedback, VNCI operation j2534=GodiagGD101 confirmed with techstream, odis, jlrsdd, hds, gds2, in the range of 1 line can, 1 line K

[boner200]

Works with Odis I have tried it, Jlr sdd, Gm2 and Honda do see it but I have not tested on car yet.

[Norwest]

I purchased one and it does not change baud rate when attempting a programming sequence, They claim it functions same as the Openport 2.0 but that is a false claim.

[VNCI Wu]

[引用=西北;4466634]我购买了一个，它在尝试编程序列时不会改变波特率，他们声称它的功能与 Openport 2.0 相同，但这是一个错误的说法。[/引用]
你说的这个问题已经更新,更新固件固件之后就可以了。https://mega.nz/file/YfdyHJSJ#pDtWE892WABteBuPeLcb3g9-gaekBmnqBxtbMbRmyo8 GD101 GODIAG V1.2

[torzet]

VNCI Wu
The new Godiag GD101 driver will probably also fit the VNCI J2534 nano. They may be the same devices but in a different housing.

[ProximaCentauri]

I bought the pink VNCI Nano to test with Renault Clip, but unfortunately it didn't work. Clip detects it, but it won't even read VIN - tested with both VNCI Nano drivers and all Godiag drivers I could find, also updated firmware.
I thought that maybe the CAN transceiver chip (SIT1050) is bad, so I tried replacing it with a genuine NXP tja1050, but it didn't change anything. I later also confirmed with an oscilloscope that the can transceiver is indeed working, it's just not talking to the car in Clip.

It also has ELM327 mode but it doesn't work very well - I ran ELM test in PyRen and it says it has a lot of ELM instructions missing, even some v1.0 instructions. Needless to say, it doesn't work with PyRen and renault cars in general.

As for VNCI Nano/Godiag compatibility, it's clearly the same device. Funny thing, but I messaged the official Godiag store on Aliexpress to ask for drivers, because the links on their product pages no longes worked, and.... Godiag sent me the VNCI J2534 Nano drivers instead of the Godiag GD101 drivers. So yeah, it's definitely one and the same thing. And btw they still didn't fix the dead drivers link on the product page :disturbed:


Some pictures for reference, made before I replaced the SIT with TJA1050. Will probably swap it back anyway since it didn't change anything.
952045

[flyfvdi]

Yes, i know VNCI is stic company zhu engineer tool. rubbish tool,no support and no repair.

[flyfvdi]

STIC company locked all old tools and never support all old tools, in order to let you buy the stic VNCI new tool.
955489955490955491

[VNCI Wu]

[QUOTE=ProximaCentauri;4516694]我买了粉红色的VNCI Nano来测试雷诺Clip，但不幸的是它没有用。Clip检测到它，但它甚至不会读取VIN - 使用VNCI Nano驱动程序和我能找到的所有Godiag驱动程序进行了测试，还更新了固件。
我想也许CAN收发器芯片（SIT1050）不好，所以我尝试用真正的恩智浦tja1050替换它，但它没 有改变任何东西。我后来还用示波器确认了罐头收发器确实在工作，只是它没有在 Clip 中与汽车交谈。

它也有 ELM327 模式，但它工作得不是很好 - 我在 PyRen 中运行了 ELM 测试，它说它缺少很多 ELM 指令，甚至一些 v1.0 指令。不用说，它不适用于 PyRen 和雷诺汽车。

至于VNCI Nano/Godiag的兼容性，它显然是同一个设备。有趣的是，但我在全球速卖通上给官方 Godiag 商店发消息询问司机，因为他们产品页面上的链接不起作用，而且......Godiag 给我发了 VNCI J2534 Nano 驱动程序，而不是 Godiag GD101 驱动程序。所以是的，这绝对是一回事。顺便说一句，他们仍然没有修复产品页面上:distur bed:


的死驱动程序链接 一些图片供参考，在我用 TJA1050 替换 SIT 之前制作。无论如何都可能会把它换回来，因为它没有改变任何东西。
952045[/引用]

Renault Clip is supported. We have discovered this bug and can use it after upgrading,


PyRen is not supported, this device does not support PY

[VNCI Wu]

[QUOTE=Torzet;4481037]VNCI Wu
新的Godiag GD101驱动程序可能也适合VNCI J2534 nano。它们可能是相同的设备，但位于不同的外壳中。[/引用]

The two devices are identical, but the drivers are different. It is recommended that you use the corresponding drivers

[flyfvdi]

959854

VNCI is STIC company zhu engineer tool,crap


Warning:
zhu engineer never any technical support.
zhu engineer never any warranty.
zhu engineer locked your tool anytime.

[flyfvdi]

oh my god， it can not do hscan and mscan, surprise!!!

[ProximaCentauri]

Renault Clip is supported. We have discovered this bug and can use it after upgrading

Interesting! Was that update released yet? Recently I tried with newest GD101 2.1 drivers + 1.8 firmware and Clip still didn't work.
Where can I download VNCI drivers if they work with Clip? When I asked the VNCI Nano seller for drivers, he sent me.... GD101 drivers instead. And when I asked a Godiag official seller for drivers, he sent me VNCI Nano drivers instead, but some old version. So it seems that even the (official?) sellers don't see the difference.

[VNCI Wu]

[QUOTE=ProximaCentauri;4544018]有趣！该更新是否已发布？最近我尝试使用最新的GD101 2.1驱动程序+ 1.8固件，但Clip仍然无法正常工作。
如果 VNCI 驱动程序与 Clip 配合使用，我可以在哪里下载它们？当我向VNCI Nano卖家询问驱动程序时，他给我发了...改为GD101驱动程序。当我向Godiag官方卖家询问驱 动程序时，他给我发了VNCI Nano驱动程序，但是一些旧版本。因此，似乎即使是（官方？）卖家也看不出区别。[/引用]

The black case uses GODIAG's driver, while the red case uses VNCI's driver

[ProximaCentauri]

The black case uses GODIAG's driver, while the red case uses VNCI's driver

Then the people selling them(including official stores) don't know that, since they're sending the wrong drivers. Anyway, I have the red VNCI J2534 Nano, are the Clip-compatible drivers released somewhere already?

[VNCI Wu]

[QUOTE=ProximaCentauri;4547493]然后卖它们的人（包括官方商店）不知道这一点，因为他们派错了司机。无论如何，我有红色的VN CI J2534 Nano，兼容Clip的驱动程序是否已经在某个地方发布？[/引用]

驱动程序兼容，但我需要修改注册表。测试完后，我会回复你。这将需要几天时间

[VNCI Wu]

I have tested the Renault clip and it does not work. I will continue to search for issues and will only reply to you when I am sure it can be used

[ProximaCentauri]

Thanks for the update on the matter. Is it the same as I described - after editing the registry according to https://www.digital-kaos.co.uk/forums/showthread.php/999121-Can-Clip-OpenPort-2-0 , Clip detects the passthru but can't connect to any ECU or read VIN?

If you need any extra testing then feel free to message me.

[VNCI Wu]

Hello, there are new updates to GD101 and VNCI nano. You need to update the V2.2 software and drivers in the Device Manager. After the update, you can now use Rallo's CLIP software.

[VNCI Wu]

966360I have tested it in V2.2 and there are no issues. If you have any new issues, you can contact me at

[torzet]

VNCI Wu
Make version 2.2 drivers available for everyone

[VNCI Wu]

Everyone can use it, and the online update software is ready to use

[torzet]

I am asking for a link to the new 2.2 drivers, I did not find it on the web. Online firmware update only

[ProximaCentauri]

Thanks for the news! Indeed I have tested the new 2.2 driver with an ECU on bench and it is now working! (will try in car later too but I see no reason why it wouldn't work).

There are some issues with the driver updater though.
First I tried to update using the GD101 drivers update tool, I tried various versions but none worked. It detects version 2.2 on server but it fails to download it (it says "Completed" but the update file is not downloaded).

After that I tried the update tool in VNCI Nano 1.3 driver and it worked, it downloaded the 2.2 installer and I could successfully update. Connected to ECU on first try - good work VNCI Wu! It seems it's not true what someone else here said about bad support.

I'll send the driver installer (the update tool downloaded full installer) to torzet so he maybe adds the link to the main post.

Edit: tested in a car and it actually seems to support Clip better than OP2.0, or at least the clones of OP2.0 - more details in the Openport Clip thread.

[VNCI Wu]

Thank you very much for your feedback. It was my oversight and I forgot to upload it online. You can now update the GODIAG software online. Of course, there are also separate meg links:
https://mega.nz/file/wac0yIyJ#hjpV3mBlmly3VYh5H0je1XC6tPBCD7mpCQ74IZcDG d0 GD101 GODIAG V2.2
My SKYPE is: not allowed ...:)
If you have any other questions later, you can contact me

[kostyal]

Hello, I am having issues connecting GD101 to Lexus RX via Techstream. I can read VIN and only a 4 of 21 ecu! Could this be fixed with a driver update or is it a GD101 hardware issue?

[ProximaCentauri]

What driver version are you using? Did you update the firmware to the most recent (I believe 1.8) version?

[kostyal]

I have the latest update: fw 1.8, driver 2.2

[VNCI Wu]

I have the latest update: fw 1.8, driver 2.2
Send me remote, TV or TODESK

[VNCI Wu]

Send me remote, TV or TODESK
VNCI NANO and GD101 have upgraded new firmware and software, and fixed bugs in Renault Clip software.
Upgrade the software to version V2.3 and firmware to version V1.9 before it can be used.

[kostyal]

With firmware version V1.9 my car connects very well!!! Thank you!

[boner200]

Yes just updated to v1.
9 and its working well

[djnovy]

Xentry works on gd101?

[moldo25]

error update 1.9

[ProximaCentauri]

error update 1.9
Care to elaborate?

[auto techniek]

Flashing ECU with Odis E not working. corrupted software. Car did not start
For Diag working wel

[Dunker]

I have a GD101 and was going to try it with GDS2. I've looked at the v2.3 software but it's the wacatac Trojan that defender reports that's putting me off. Virus Total online reports it as well.

[Rax1791]

Yes it 's working.

[boner200]

Just an update guys it is now working with Odis 23 after latest firmware update.