Peugeot 807 2.0HDI EDC15C2 immo off

[omglol]

Hello!

Can somebody check if this immo off solution is correct for EDC15C2 with 3 plugs (Peugeot 807 2.0HDi)?

I don't have the car here to try, but on the bench, I cannot read parameters or delete DTCs. Also, I cannot read ECU now that the EEPROM is soldered back ON.

Flash was read/written by MPPS.


Thanks!!

[rafal]

flash ok , eeprom bad

[omglol]

flash ok , eeprom bad

Thanks, I will try. There is no need to unplug anything or cut any wires?

[rafal]

Thanks, I will try. There is no need to unplug anything or cut any wires?

Don't need.........