View Full Version : suzuki swift keyless (old system)
sdnatlst
16th December, 2022, 10:29 AM
customer lost remote part, its the old 2005 keyless go system with nob on steering coloumn, uk model,
does anyone know how to program a new proxy remote part, he has the blade with chip still to start car
is it manual process or need to learn it wit ha tool? thanks
rapidlocksmiths
16th December, 2022, 11:07 AM
its manual , but theres a number of slightly different procedures dependent on system fitted , all similar with slight procedure differences.
common one is
sit in drivers seat with doors closed but unlocked
insert blade in ignition
press door lock switch to lock and unlock 3 times
press drivers door switch to lock
remove and reinsert key blade 4 times
turn key on and start engine for 3 seconds
turn ignition off
door locks should now cycle and a buzzer may sound
press any button on the remote to program
door locks should cycle again
switch ignition on and off to close programming
this is 1 of the variations of the process theres a number of slightly different variations
sdnatlst
16th December, 2022, 11:18 AM
cheers mate
sdnatlst
16th December, 2022, 11:19 AM
i assume then, a second hand keyless fob can be used
jodge
16th December, 2022, 10:23 PM
i assume then, a second hand keyless fob can be used
yepp, no need to unlock
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.