PDA

View Full Version : T5.1 cluster swap possible with vvdi2


teerak2uk
17th December, 2022, 12:49 PM
Is it possible on T5 2011 or just easier to do via odis online

Many thanks
rafal
17th December, 2022, 12:57 PM
ori dash still readable ?
teerak2uk
17th December, 2022, 01:03 PM
Yes it is still readable
rafal
17th December, 2022, 01:06 PM
read immo from orig cluster , then write immo to donor cluster
brend
17th December, 2022, 01:38 PM
Is it possible on T5 2011 or just easier to do via odis online

Many thanks

If you have vvdi2 and know how it's go , for what pay !?
teerak2uk
17th December, 2022, 02:17 PM
If you have vvdi2 and know how it's go , for what pay !?But that's why I asked because I don't know if vvdi2 can do it and if it can is it reliable
Maartinj
19th December, 2022, 09:12 AM
of course can,
Daku11
8th January, 2023, 08:18 PM
Read only immo didn't work.
You must move much more from OE to donor dash.
akidor
8th January, 2023, 09:04 PM
Fore sure itīs enough to swap just immo data, did it several times. Car will start then. Swap coding and maybe adaptions and you are fine.
alonedark
8th January, 2023, 11:16 PM
it is dashbord of 2009 to 2013 years can do with many tools clone no without problem, but if you dont have orginal keys in donor dashboarh need to do some for you can write inmo data. i think this dash is nec +32 or 64 if need this for write inmo data .


[VAG with NEC MCU + 24C32 inside] - range 0xCC0 - 0xEAF in hex editor with FF FF ..
[VAG with NEC MCU + 24C64 inside] - range 0x12E0 - 0x14CF in hex editor with FF FF ..


and you can write inmo data