Ford Fiesta 1.6TDCI DASH & ECU files needed

[Nazo]

Please can some1 share good working set files for this 1.6 tdci fiesta 2006

Iv got replacement ecu as original one is lost..iv also tried with ids but look bellow pic with error
Thanks https://uploads.tapatalk-cdn.com/20221219/c7e77ee9f5d4db30ebd98e9faad5883f.jpghttps://uploads.tapatalk-cdn.com/20221219/a2cb435d41dc3eedd3c661c1f002d7fd.jpghttps://uploads.tapatalk-cdn.com/20221219/04ec03382b9e01517265fd3a00b33334.jpg

Sent from my SM-A226B using Tapatalk

[Nazo]

If read files can you do sync?

Sent from my SM-A226B using Tapatalk

[smokin66]

program with ids but make it think its blank pcm with it unplugged from car until it checks voltage then plug it in,it will reprogam pcm and dash

[Nazo]

program with ids but make it think its blank pcm with it unplugged from car until it checks voltage then plug it in,it will reprogam pcm and dashThanks smokin66..but iv tried ids and look bellow errorhttps://uploads.tapatalk-cdn.com/20221219/e28ca97623d19c6f5f781262e2f20f24.jpg

Sent from my SM-A226B using Tapatalk

[kiszka]

If read files can you do sync?

Sent from my SM-A226B using Tapatalk
read eeprom ecu and dash then i will do synchro

[Diagprog72]

hello if it can help you here is the compatibility list for your ECU
0281014803
xxxxxxxx989
xxxxxxxx990
xxxxx015428
xxxxxxxx732
xxxxxxxx826
xxxxxxxx856
xxxxxxxx857
xxxxxxxx858
xxxxxxxx859
xxxxxxxx860
xxxxx016211
xxxxx017653
xxxxxxxx720
xxxxxxxx752

[Nazo]

hello if it can help you here is the compatibility list for your ECU
0281014803
xxxxxxxx989
xxxxxxxx990
xxxxx015428
xxxxxxxx732
xxxxxxxx826
xxxxxxxx856
xxxxxxxx857
xxxxxxxx858
xxxxxxxx859
xxxxxxxx860
xxxxx016211
xxxxx017653
xxxxxxxx720
xxxxxxxx752Thanks Diagprog I hope I bought correct ecu [emoji17]

Sent from my SM-A226B using Tapatalk

[Nazo]

Iv tried ids to do scan just test ecu..but i get no communication
I try another tool tomorrow to see if it communicats

Sent from my SM-A226B using Tapatalk

[Diagprog72]

hi here is your file

[kiszka]

hi here is your file
this software is 8V21-12A650-PE or 8V21-12B684-DA or 6G91-12B684-EA or 8A6T-12K529-AA or 8V21-12K532-BE

[Nazo]

hi here is your fileBro I have the replacement ecu with this same type software you uploaded
I need dash & ecu files then I can program key
I already have the ecu I need do synchro now

Sent from my SM-A226B using Tapatalk

[Nazo]

this software is 8V21-12A650-PE or 8V21-12B684-DA or 6G91-12B684-EA or 8A6T-12K529-AA or 8V21-12K532-BEI already have good replacement ecu can do synchro dash and ecu?

Sent from my SM-A226B using Tapatalk

[kiszka]

I already have good replacement ecu can do synchro dash and ecu?

Sent from my SM-A226B using Tapatalk
read eeprom ecu i dash

[Nazo]

here dash 9s12H256 and replacement ecu 95320
please can you do syncro

[kiszka]

here dash 9s12H256 and replacement ecu 95320
please can you do syncro
check if all is well https://mega.nz/file/87YhXALZ

[Nazo]

check if all is well https://mega.nz/file/87YhXALZI will test it tommrw
So must I write only ecu?

Sent from my SM-A226B using Tapatalk

[Nazo]

check if all is well https://mega.nz/file/87YhXALZBrother please can you email it to me?
I'm have issues downloading from mega
**********
Sent from my SM-A226B using Tapatalk

[Nazo]

Check not downloading https://uploads.tapatalk-cdn.com/20221219/1bb7ad6efe56b4ebec1ccd15c1acdaa7.jpg

Sent from my SM-A226B using Tapatalk

[Nazo]

check if all is well https://mega.nz/file/87YhXALZThanks kiszka with your file pats security light goes out when I put ignition on..
But no crank so I think the car have another problem with starter

Keep you updated

Sent from my SM-A226B using Tapatalk

[Nazo]

Ok iv put scan tool and found this bellow dtc and dash & pcm lost communication https://uploads.tapatalk-cdn.com/20221220/0572d5343fb427ebebf2be69426f7bed.jpghttps://uploads.tapatalk-cdn.com/20221220/cd862ed140dd03068feac87da741ee14.jpg

Sent from my SM-A226B using Tapatalk

[Nazo]

guys im so sorry iv tried with different cluster here is file of original cluster

[Nazo]

guys im so sorry iv tried with different cluster here is file of original clusterPlease check ecu file above I need it sycrod to this last original cluster file..
Because this original cluster matches the car vin

Sent from my SM-A226B using Tapatalk

[Nazo]

Goit kiszka I will test it keep you updated
Thanks regards [emoji4]

Sent from my SM-A226B using Tapatalk

[Nazo]

Goit kiszka I will test it keep you updated
Thanks regards [emoji4]

Sent from my SM-A226B using TapatalkOk iv tested file on ecu but still no crank..also dtc says U0100 MISSING THE CAN MESSAGE FROM PCM..this dtc is in cluster


Sent from my SM-A226B using Tapatalk

[Nazo]

Guys I think I bought wrong ecu because my fiesta tdci is 2006..
But the replacement ecu looks like it should fit newer ford's..
But I'm not sure please can you guys help to confirm if I'm right or wrong?
Thanks

Sent from my SM-A226B using Tapatalk

[kiszka]

Guys I think I bought wrong ecu because my fiesta tdci is 2006..
But the replacement ecu looks like it should fit newer ford's..
But I'm not sure please can you guys help to confirm if I'm right or wrong?
Thanks

Sent from my SM-A226B using Tapatalk
your ecu is from 2008.
And it is, it is a newer model

[Diagprog72]

My brother I'm sending you the synchro software and you can do it alone if you want 😉, tonight I'm sending you the FORD AL IN ONE prog

[kiszka]

My brother I'm sending you the synchro software and you can do it alone if you want , tonight I'm sending you the FORD AL IN ONE prog
Let's say he does something there

[Nazo]

My brother I'm sending you the synchro software and you can do it alone if you want [emoji6], tonight I'm sending you the FORD AL IN ONE progThanks bro please send it


Sent from my SM-A226B using Tapatalk

[Nazo]

Let's say he does something thereThanks kiszka so it won't fit on my fiesta?

Sent from my SM-A226B using Tapatalk

[kiszka]

Thanks kiszka so it won't fit on my fiesta?

Sent from my SM-A226B using Tapatalk
I didn't say it wouldn't fit, although it does happen
the question is whether it will be able to do what you want to do

[Nazo]

I didn't say it wouldn't fit, although it does happen
the question is whether it will be able to do what you want to doThanks kiszka..I'm not sure myself..
Look iv tried with vcm2 & IDS but for some reason ids can't connect to get the calibration files..says network error [emoji58]
Help please https://uploads.tapatalk-cdn.com/20221222/8cbd4ef0c43deabdfee2b22298bda490.jpghttps://uploads.tapatalk-cdn.com/20221222/61ebc84467a4f1b6f16d31948307083a.jpg

Sent from my SM-A226B using Tapatalk

[kiszka]

Thanks kiszka..I'm not sure myself..
Look iv tried with vcm2 & IDS but for some reason ids can't connect to get the calibration files..says network error [emoji58]
Help please
Sent from my SM-A226B using Tapatalk
I think the problem may be the ecu is not suitable for this car
it turns out that the car is from 2006, and the ecu is from 2008, and has a newer immo solution

[Nazo]

I think the problem may be the ecu is not suitable for this car
it turns out that the car is from 2006, and the ecu is from 2008, and has a newer immo solutionYes I think u right..please can you tell me compatible ecu..look vin number bellowhttps://uploads.tapatalk-cdn.com/20221222/bfa9c64f78a30b68f2e76714048e947f.jpg

Sent from my SM-A226B using Tapatalk

[Nazo]

Please guys I really need to know what is correct type ecu for this vehicle?


Sent from my SM-A226B using Tapatalk