PDA

View Full Version : HOw TO VERGINISE EDC16C7



chakahafed
6th March, 2010, 05:23 PM
hi
i want to creat new key for mercedes W203 008 , model 2004!
It have a EDC16C/C2-7 ecu !
how to verginise this ecu and Strat the car?
i have abritus commander !
if this operation recure another tool pleas tell me what i need !
thanks

Floyd
6th March, 2010, 05:32 PM
BDM but you will need the immo data from a new virgin ecu

chakahafed
6th March, 2010, 06:13 PM
BDM but you will need the im*o data from a new virgin ecu

can you explane more , i am a newbe

mercis
6th March, 2010, 07:16 PM
is this om 612? or 647?

chakahafed
6th March, 2010, 10:29 PM
is this om 612? or 647?
HI mercis
It is a C220 CDI , ithink OM 612

highline
6th March, 2010, 11:41 PM
Please send me the org EEprom 95320 and OM number

mercis
7th March, 2010, 07:19 AM
c220 cdi is om 611 or 646 4 zyl.

chakahafed
7th March, 2010, 09:52 AM
c220 cdi is om 611 or 646 4 zyl.

Sorry OM 646 4 SYL
http://www.db-forum.de/galery/data/500/Abdeckung_OM646_W203_Mopf.jpg

chakahafed
7th March, 2010, 09:57 AM
Please send me the org EEprom 95320 and OM number
Where to find org EEPROM and OM number so i give it to you

mercis
7th March, 2010, 11:53 AM
Where to find org EEPROM and OM number so i give it to you


om 646,see picture

highline
8th March, 2010, 11:47 PM
Please disassemble the ECU very careful. The board is bonded very tightly. Previously heated with a heat gun. The EEprom is under the Injection-molded housings .

Ne0
9th March, 2010, 04:37 AM
Hi !

NO need to disassemble the ECU - only open back cover and simple readout eeprom with BDM100 ( CMD 1255) tool trough BDM connection, i opened few hundred of EDC16 and in few situations killed him....

If you need - I can renew dump...

Regards,
Ne0

chakahafed
9th March, 2010, 04:54 PM
Hi !

NO need to disassemble the ECU - only open back cover and simple readout eeprom with BDM100 ( CMD 1255) tool trough BDM connection, i opened few hundred of EDC16 and in few situations killed him....


If you need - I can renew dump...

Regards,
Ne0



thanks but where to find a original BDM 100 with a trusted Seller ?

3abas27
29th January, 2012, 01:28 AM
thanks but where to find a original BDM 100 with a trusted Seller ?
WITH BDM 100 YOU CAN READ EPROM 95320 MAKING VIRGIN WRITING BACK ADAPATATION WITH STAR DIAG ALL OK BUT WHEN THE EPROM IS 95160 NOT POSSIBLE REDING WITH BDM 100 OK FOR 95160 THE PROBLEM IS IN WRITING BACK THE VIRGINING DUMP GET ERROR I TRY IT WITH MYSELF

GOOD LUCK

itrade
29th January, 2012, 02:12 PM
Carefully peel off the board, use the hot air !

kareszka
30th January, 2012, 07:29 AM
Guys!
This is almost 2 years old thread.:dancing2: