Dreamup probs when using USB to Serial Cable - any ideas?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • raja2kb
    Newbie
    • Feb 2012
    • 1

    #16
    Target not connect or target is error status!

    Target not connect or target is error status!
    Serial to USB port problem?

    Comment

    • afaaro
      Newbie
      • Mar 2012
      • 1

      #17
      Is there additional option for the usb to serial

      Comment

      • pekakbadak15
        Top Poster
        • Mar 2012
        • 103

        #18
        Originally posted by afaaro
        Is there additional option for the usb to serial
        If box still have ip address, can flash via telnet method else try with old computer with serial port.

        Comment

        • cerealkiller
          Newbie
          • Mar 2012
          • 10

          #19
          Hi,

          This is my 1st post. Tot i'll share on my successful image backup.

          Dreambox DM500C
          Dreamup Version: 1.3.3.9 installed in Win 7 64 bit
          Connection: USB to RS232 Adapter with null modem cable + local network

          * Tip: Buy the "ATen USB-RS232 adapter" from SLS #03-69 ( i think its $25.00 )
          ( dun save on $$$, cheap ones may give u problem in newer OS )

          At first, i tried to backup using purely null modem cable, but got backup error after 3-4 seconds. Changing Dreamup version does not help.

          Solution:
          Use Null Modem Cable + Tick "Use Network" in Dreamup and enter local and remote ip address. Make sure that dreambox and PC is connected to local network.
          Boom ... Backup in less than 5 mins

          ** I would assume you have already connected the dreambox to your local network correctly, if not pls do not try **

          That's it. Hope this helps.

          Comment

          • DBTraitor
            DK Veteran
            • Feb 2011
            • 616

            #20
            here is a cheap one from china which works. I bought a few

            USB to RS232 Serial 9Pin Cable Adapter PC PDA GPS | eBay
            A wise man learn more from a foolish question than a fool can learn more from a wise answer.

            Comment

            • EAMO 2
              DK Veteran
              • Nov 2008
              • 1201

              #21
              Originally posted by cerealkiller
              Hi,

              This is my 1st post. Tot i'll share on my successful image backup.

              Dreambox DM500C
              Dreamup Version: 1.3.3.9 installed in Win 7 64 bit
              Connection: USB to RS232 Adapter with null modem cable + local network

              * Tip: Buy the "ATen USB-RS232 adapter" from SLS #03-69 ( i think its $25.00 )
              ( dun save on $$$, cheap ones may give u problem in newer OS )

              At first, i tried to backup using purely null modem cable, but got backup error after 3-4 seconds. Changing Dreamup version does not help.

              Solution:
              Use Null Modem Cable + Tick "Use Network" in Dreamup and enter local and remote ip address. Make sure that dreambox and PC is connected to local network.
              Boom ... Backup in less than 5 mins

              ** I would assume you have already connected the dreambox to your local network correctly, if not pls do not try **

              That's it. Hope this helps.
              Good man, just be careful setting PC I.P. address. If connected to router use ROUTER I.P. address. If connected to P.C. via LAN
              use LAN I.P. address, usually 192.168.0.1

              Comment

              Working...