Evocamd 2.17c

[Devilfish]

If you have your box connected to your router, you can download new emu using the addons menu.

Yellow > Addons Manager > DK Addons > EMU

If you are using evocamd_2.12 and still getting freezing, press "Menu > Information > Right > Right" and note the SNR reading. This needs to be above 96% before you'll get rid of the freezing. If it's below 92% then you will need to either remove a splitter or get a signal booster.

Try connecting the dreambox to the main feed and see if the SNR % improves and the freezing stops. If it does, you have a low signal and you'll need a booster if you want to connect the splitter back into the line.

[shaz4215]

You do a manual install using the addons menu.

Which image are you using?

To be honest, for cable, this verison won't be any better than 2.12 that you have installed. If anything, you'll need extra files on the box and it won't run as smooth. v2.12 is the best for cable.

i am using the dk1.1 image. I was told to try 2.1.7c because i suffer from channel freezing...

[Donnie Darko]

Thtas right 2.11 and 2.12 are smoothest of the Evo cams.

[Devilfish]

You do a manual install using the addons menu.

Which image are you using?

To be honest, for cable, this verison won't be any better than 2.12 that you have installed. If anything, you'll need extra files on the box and it won't run as smooth. v2.12 is the best for cable.

[shaz4215]

Ok i'm using 2.12 evocamd. I put the evocamd 2.17c .tbz2 file into the temp folder. But now how do I install it? I press the blue button and i just get the plugin menu. With radio, rss news reader, tuxbox commander and teletext.

So what do i need to do exactly?

[dctyper]

followed these instuction, installed it, restarted the box but cant see it in the selection

[Integrale Man]

Latest update of Evocamd emu.

Tested on ex-tw and AU fine.

Unzip and copy .tbz2 file to /tmp folder.

Install via manual install option in Blue button menu.

Enjoy!

I don't seem to have this option in the blue button menu. I am using kaos v1.1 image with evocamd 2.12 built in. Only thing I can see in there of any relevance is the Tux commander.

[shahg12]

Hi,
I uploaded this in the .var/tmp directory, but when I go in my Blue Panel and try to install it manually, ITS NOT THERE, i mean i can't see it the var/tmp directoy, i mean there is nothing there that I can select, am I doing something wrong?
Thanks

[wlodekpilot]

thanks

[kevinly]

I'm expecting this to fix my box, it is constantly stuttering and stammering. chorus ireland.

<--kevinly added 43 Minutes and 22 Seconds later...-->

Hmm does having the digitalworldz image 2.0 prevent this from upgrading? I'm getting an error and cannot use this version (stays at 2.12)

Nevermind, faulty cable.

[Donnie Darko]

version number

[limer]

hi ,does the small c in evocam217c stand for cable or just a version number

[Curious123]

Is there a way of installing this Eoccamd2.17c via telnet...if so what would the command be?

If you ftp the tar file that DF has posted to the var/tmp on your dreambox and than see if you could do a manual install with the remote using the Blue button it should unpack and copy to the correct directory on your dreambox.

[Celtictiger]

Is there a way of installing this Eoccamd2.17c via telnet...if so what would the command be?

[faddy]

excellent thanks for the concise and clear instruction..

have to say very this is an excellent forum..