I FLASHED ME DBOX DBOX ATFER FLASHING IT KEEPS REBOOTING AUTOMATICLY AND CAN NOT ACCESS THE FILE VIA NULL CABLE NOR ROUTER
HELP ME PLEASE
Collapse
X
-
Try reflashing with Image Flashing Assistant. Make sure you are using the correct image for your dbox, ie 1x or 2x.
Please don't use all caps in the forums, it looks like you're shouting
-
If you like my post pleas click on the little button to say thank you.Comment
-
what's happening when you switch the box on?? does it re-boot straight away?? if so you'll need IFA to flash another image, if it stays on and you just cant connect via FTP it's because when you flash a new image to dbox ip address changes so you'll need to change that to what you were using to connect to it beforeComment
-
Please check the following:
1) Check your dbox can accept x1 or x2 image and flash the correct image (find images in download section).
2) Check your Local Area is setup correctly and enabled and disable other networks.
3) Finally some boxes need more than one go to accept the flash.
Good luckIf you like my post pleas click on the little button to say thank you.Comment
-
thanks mate managed to flash the box successfully 1 more think if you can help me i only recieve fta channel how do i get subscibed 1. thanksPlease check the following:
1) Check your dbox can accept x1 or x2 image and flash the correct image (find images in download section).
2) Check your Local Area is setup correctly and enabled and disable other networks.
3) Finally some boxes need more than one go to accept the flash.
Good luckComment
-
i wont let me load any file keep get error occurred copying a file to ftp server. make sure you have permission to put file on server.
details
200 swicth tio binary mode
227 entering passive mode (192.168.2.4.150.221)
553 could not create fileComment
Comment