Missing Channels, Nagra3 is there a link???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Scuzzking
    Newbie
    • Nov 2008
    • 15

    #1

    Missing Channels, Nagra3 is there a link???

    right this is a strange one, flashed my dads dbox2 with commando V10 cause he lost slysp1,2,3 and some other channels when he was running lakys-sylas. he's glasgow south ntl and never usually gets any problems. there's only one thing he gets loads more channels than me (all the regional/national channels example, bbc1 england, anglia). done all the usual i.e set location and the like but still no slysp1,2,3..then re-flashed lakys-sylas again and guess what still missing channels... is there a link to this nagra 3 stuff thats happening across the water since he,s getting all the regional channels

    hope this makes sense to you all out there
  • psats
    DK Veteran
    • Sep 2008
    • 823

    #2
    no nothing to do with n3 no problems here getting them channels

    Comment

    • Scuzzking
      Newbie
      • Nov 2008
      • 15

      #3
      thought that myself but just wasn,t 100% sure.
      he does get a massive amount of channels that i don,t
      it,s as if he is connect to the whole country instead of just scotland
      just does not make any sense, just like my reply

      Comment

      • Nj2006
        V.I.P. Member
        • Aug 2008
        • 28

        #4
        maybe your image is fta only and requires magic files to make it tick.

        normally an image write up and its pdf file will tell you if this is the case.

        good luck hope you get yourself sorted

        Comment

        • Danril
          Top Poster
          • May 2008
          • 122

          #5
          Run through the entire thing and do a re-scan and the lot.

          Eliminate every other possibility first.

          Comment

          • Scuzzking
            Newbie
            • Nov 2008
            • 15

            #6
            Originally posted by Nj2006
            maybe your image is fta only and requires magic files to make it tick.

            normally an image write up and its pdf file will tell you if this is the case.

            good luck hope you get yourself sorted
            all the file are there FPT them no probs.... get most sly channels apart from 90% movies and sly sp 1,2,3.

            get sly extra

            Comment

            • Scuzzking
              Newbie
              • Nov 2008
              • 15

              #7
              Originally posted by Danril
              Run through the entire thing and do a re-scan and the lot.

              Eliminate every other possibility first.

              done all that. the only thing i have not done is a full ifa image reflash.. as if it was a kein system???

              Comment

              • Scuzzking
                Newbie
                • Nov 2008
                • 15

                #8
                Originally posted by Nj2006
                maybe your image is fta only and requires magic files to make it tick.

                normally an image write up and its pdf file will tell you if this is the case.

                good luck hope you get yourself sorted
                don't you find it strange that the old man picks up all the bbc and itv regional channels.... i only pick up a small percentage of what he does

                could he be on a main Line? hub? server? type thing?????????

                Comment

                • Danril
                  Top Poster
                  • May 2008
                  • 122

                  #9
                  Back up your image and your Dad's image. Flash your Dad's image on your machine and see what it does at his house and then yours. Take your Dad's box to yours and see what happens.

                  It could be the tuner in your Dad's is a top one I suppose, or something to do with the cabling in the respective houses so trying both boxes and the images etc will help you eliminate or isolate if one of those possibilities proves right.

                  Comment

                  • Scuzzking
                    Newbie
                    • Nov 2008
                    • 15

                    #10
                    Originally posted by Danril
                    Back up your image and your Dad's image. Flash your Dad's image on your machine and see what it does at his house and then yours. Take your Dad's box to yours and see what happens.

                    It could be the tuner in your Dad's is a top one I suppose, or something to do with the cabling in the respective houses so trying both boxes and the images etc will help you eliminate or isolate if one of those possibilities proves right.
                    he's ntl glasgow south and am tw udddingston so different settings, so what i could do is take his box to my house change settings to my location and re-scan..

                    cheers try that today

                    Comment

                    • Scuzzking
                      Newbie
                      • Nov 2008
                      • 15

                      #11
                      dbox update

                      still cannot get the channel but when i checked the settings on the vm samsung box i noticed vm had changed the frequency setting from 755000 to 499000. once i changed the frequency on the image i can now do a fast scan and pick up channels, before i had to do full scans, so now here's the question
                      do i have to change symbol rate and netid ?

                      Comment

                      Working...