Have i bricked my DBOX?

[denzilv]

Hi all
Got a new box of the bay, came with a sportster so decided to flash it with a Commando image, all went well but when it completed flashing it did not boot up at all. So decided unplug and replug it..

came up with Kein System

went through the forums and decided to use the IFA. The log on the screen says

BootP: Got request from 00509C1E9FC9
Error DeleteIpNetEntry: The parameter is incorrect.

BootP: Created ARP-entry with IP: 192.168.1.202 and Mac: 00509C1E9FC9
BootP: Answer to 00509C1E9FC9 sent

not sure what is going on here.

my DBOX is connected to my router and the pc to the router all using normal network cables.

Can someone help me with where i am going wrong please? i can see it is not picking up the DBOX on the network, is that the problem can somebody please help?

[Bulld0g]

Try another image m8.Failing that try flashing with a null modem

[DW190]

Make sure you start the download with the box powered up then unplug and plug back in.

[denzilv]

Sorry.. DW190.. i dont understand .. you mean leave the box in kein message state..start IFA, switch off the DBOX and then switch it back on again?

[gizmo.1484]

You need to use a xover cable and a null modem cable but can be just done with a xover cable to use ifa.

[DW190]

Sorry.. DW190.. i dont understand .. you mean leave the box in kein message state..start IFA, switch off the DBOX and then switch it back on again?

Yes thats what I mean.

People have been starting ifa then powering on the box. (can take many trys to break the loop) If you have it powered on when you start ifa then Off & On it never fails with me.

I dont go through a router. Laptop to dbox.

[yamar1]

Hi all
Got a new box of the bay, came with a sportster so decided to flash it with a Commando image, all went well but when it completed flashing it did not boot up at all. So decided unplug and replug it..

came up with Kein System

went through the forums and decided to use the IFA. The log on the screen says

BootP: Got request from 00509C1E9FC9
Error DeleteIpNetEntry: The parameter is incorrect.

BootP: Created ARP-entry with IP: 192.168.1.202 and Mac: 00509C1E9FC9
BootP: Answer to 00509C1E9FC9 sent

not sure what is going on here.

my DBOX is connected to my router and the pc to the router all using normal network cables.


Can someone help me with where i am going wrong please? i can see it is not picking up the DBOX on the network, is that the problem can somebody please help?

sounds like you have flashed a 1x image , flash with a 2x that should sort it, use ifa to do it.

[bobon5106]

Make sure your networkcard is set to 10baseT_halfduplex or 10half mode and disable any antivirus and firewalls
also try this version of ifa
Digital Kaos - Downloads - DBOX2 Portable_Image-Flashing-Assistent

[oscor]

how to update d box

download bigmac tool bar install it then go to dbox downloads download d box image , install it [dbox will be fine] any trouble read the how to section in the dbox folder

[mr.mojorisin]

i got my box well and truly scr3wed up..flashed sportster pro to box and i think image was/is corrupt as i cant ftp to box now.network is disabled message is coming up on box...would be grateful if someone could help as i'm going nutz with this....
im using a crossover cable as i aint got a null modem one

[cgscott]

Use null modem cable to recover your box mate. Lots of info on this in the section.

[gizmo.1484]

Does your box boot up at all? If not you will need to use IFA to sort it out.
Are you sure you flashed the right image as 1x or 2x.
You can get the IFA program from here>>>Digital Kaos - Downloads - Image Flashing assistant
You can just use a xovercable with this program

[mr.mojorisin]

thanks guys...been looking through forum since 1pm today.
finally found answer..
settings>network>disable dhcp then manually input ip address.

thanks to these guys>>>>>>

http://www.digital-kaos.co.uk/forums/f35/problem-new-comando-10c-image-network-access-22514/

[cgscott]

Thought you had corrupt image

Least you sorted it.