Commando x10 !!!

[andrew]

Thanks for that i now have all my channels back but the down side is i have the same old problem , it keeps freezing. Is there some sort of signal boost i can get , would that help me.

[gizmo.1484]

If your screen keeps freezing then you should use gbox emu instead of evocamd,you can get it from the magic file you d/loaded but remember to change chomd to 755.

But if you use gbox your k#ys will not update, to get your k#ys to update you will need to change back to evocamd let them update then change back.

[andrew]

Thanks for that i will give it ago later.

[Fergal]

Thanks for that i now have all my channels back but the down side is i have the same old problem , it keeps freezing. Is there some sort of signal boost i can get , would that help me.

Press red then blue on a freezing channel and check the ber,snr and sig readings

[andrew]

Looking at the channel signal they are all only half way or less, if so how can I increase itl

[Fergal]

Looking at the channel signal they are all only half way or less, if so how can I increase itl

What are the readings a booster would increase it slx1p from argos

[andrew]

When i press the red then the blue and i get all the readings up which are the ones you need , my signel reading is 255 if that helps.

[Fergal]

The ber,snr and sig readings

[PaphosAL]

Approximate readings are fine- as they fluctuate a bit...

[andrew]

BBC1 Ber - min 0 max 1 Snr - min 63386 max 63702
Sig - min 255 max 255


Sky Sports1 Ber - min 85 max 128 Snr - min 61103 max 62411
Sig min 255 max 255

Hope this helps guys.

[plasterer]

If your signal is realy 255, thats were the prob lies
Ihave a nokia with Blade on evo with a sig of 35000

I got a Sagem 1 x supprizingly low ,also on blade G Box at 11000
On the same channel
Both running Perfect................Paul

[andrew]

Ok thanks for that, so my question is how do i increase it if i can

[plasterer]

Well you can try the Booster below.
plasterer

But that is realy low
Try it direct to the wall with no splitters..........Paul

[andrew]

Ok done that but still the same , could it be that i am only paying for broadband and no tv package and so the signal is not as strong.

[plasterer]

No Nothing to do with that
Get the booster in my last post above
Lets know how it goes................Paul