Help debugging Dbox2 Sagem

[piptaps]

I have put a number of Dbox2 Nokia into debug mode but i havent done it to a sagem box.

I have one which is nearly new but its still with original software. There is no clear guide as to how to debug a sagem. I cant find the reset point.

IS there anyone who can help me to do it or i can post to them for a fee to debug it for me?

Thanks

[Fergal]

How many chips and what make intel or amd as there is different procedures for each.

[piptaps]

its 1 chip, intel

[Fergal]

Have a read of this
New Debug-Mode

[bob114]

hi
this is the tut I followed for a sagem 1x
Now the main procedure part 2:
and the picture on page 3 for flash reset etc

this has worked for me

hope this may help

[Fergal]

its 1 chip, intel

As you have said in the other thread that you are having problems locating the write protection point this were it is for a sagem 1x intel chip (arrow pointing to schreibschutz)

[bob114]

hi
the same picture as above page 3 from tut I used for sagem 1x

[SATANiAN]

Usable for PHILIPS?

Is this debug mode tutorial usable for PHILIPS DSX5180/02A DBOX?
Thanx.

[psats]

Is this debug mode tutorial usable for PHILIPS DSX5180/02A DBOX?
Thanx.

no its only for dbox2 recievers

[nikm80]

Thank you very much for has information has helped alot

[micaufo]

SAGEM DBOX2

I have a problem during flashing Sagem dbox2. Flash with IFA, after i start flashing the box is contiuosly RESETING.

I have no remote, I can not configure dbox's IP, but IFA connects to dbox automatically.

[chris31560]

m8, u dont need a remote to flash box with ifa, just need to change ip addy on earthanet nick card on comp,,try this one..192.168.0.202, that should get ur box flashing as long as all other settins r rite....

[sestarus]

Hello

hi
this is the tut I followed for a sagem 1x
Now the main procedure part 2:
and the picture on page 3 for flash reset etc

this has worked for me

hope this may help

i will try this one. tnx 4 sharing

[greenskin1]

dbox

are theses boxes no good now ?