dbox2 problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • michie
    Newbie
    • May 2008
    • 16

    #1

    dbox2 problem

    Now this is going sound really daft .But i bought a dbox2 off ebay the guy said it had a broken connecter so fair enough bought it and said i would get a tuner so i did off ebay now i put the tuner in he said he had already put laky pro image on so i put the tuner in and guess what it came up with astra channels when i went to do a scan . is there any thing i can do apart from take the tuner backout cheers michie

    <--michie added 36 Minutes and 1 Seconds later...-->

    its ok ladies and gents different chips inside tuner comes out rest in bin
    at least ive learned from it.
    Last edited by michie; 29 May, 2008, 21:40. Reason: Automerged Doublepost
  • Devilfish
    Administrator
    • Feb 2008
    • 7872

    #2
    If you're getting astra settings, it can't communicate with the tuner and it assumes it's a satellite box, that's why you're getting satellite configurations.

    Comment

    • michie
      Newbie
      • May 2008
      • 16

      #3
      does that mean ive put the tuner in wrong devilfish . or the tuner is broken

      Comment

      • Devilfish
        Administrator
        • Feb 2008
        • 7872

        #4
        Could be either. Either it's not talking to it because you've put it in wrong (it's not that hard to install, put it in the holes and solder it in) or it's faulty.

        I've uploaded a FAQ about dbox tuners here that you can take a look at. Thanks to PT-1.

        Comment

        • johnlogie
          Member
          • Jun 2008
          • 44

          #5
          sagem 1xchipset

          Can someone tell me how to flash and whot image to use?

          Comment

          • chrispeters
            Junior Member
            • May 2008
            • 29

            #6
            Originally posted by johnlogie
            Can someone tell me how to flash and whot image to use?

            There are some real good "guides" in the download section m8.
            Same Shit Different Day

            Comment

            • techquest
              Junior Member
              • May 2008
              • 35

              #7
              Use a null modem cable & lan connection through my router, though you can use an xover directly from PC to box, using IFA to flash the image.

              You must make sure you get the turning off and on of the box in the correct step in the procedure. You will also need to be sure that your firewall allows the IFA connection to pass data, IFA seems to like the IP Addy 192.168.0.202so suggest that you set that in the Network addy on the box and include it in your firewalls allowed IP addy's. Also put your image in your root C: drive so its easy for you to point IFA to it.

              Comment

              • nkw59
                Member
                • Jun 2008
                • 41

                #8
                its not the satellite version of the d box is it ?

                Comment

                • ruprect
                  Member
                  • Jun 2008
                  • 58

                  #9
                  I had a working dbox that was looking for astra channels before, dunno why. Can't even remember if it was on the image that came with it (german) I am 90% sure it was. I just stuck on andromeda and it was fine.

                  The broken connector could easily be fixed, did the tail piece just fall off? you can make a quick botch job, soldering 2 wires on and the soldering or twisting them onto coax.

                  Comment

                  • harby_d
                    Newbie
                    • Jun 2008
                    • 4

                    #10
                    you say u had a dbox2 sat, did it scan all the channels even the encrypted ones??

                    Comment

                    Working...